HELP required regarding k20 engine

[montie777]

does k20 fit in honda city 2011?

[waitnbl33d]

yup it can fit....search for it on google....however i think the r18 from the civic reborn is a better match since it is offered from factory in china...so you would be able to get the mounts and fittings at a better price than a k20 swap.

[wasay_ahmed]

u can fit a good big engine city got good room in the bay.A guy swaped in b18 in his city

[immad100]

@poster yes you can but i wont prefer you doing so,u'l hve to cut,weld the main frame as ep3 or dc5 subframe isnt a bolt on at city.
imo city isnt a good option for a k20 swap,i term civic 7th gen best for k20 swap,as i'm swapping mine too:D lol.
civic 8th gen comes with k20 too,summary is that civic not city is better for a k20 swap otherwise u;l end up in other issues like grip,bad cornering etc.if you are thaaaaaaaaat much intrested in k20 swap,sell your city,get a 7th gen civic swap it.
btw a good k20AR costs like 400k these days:D

[salik990]

u can swap K20 but it depend on ur budget....a lot of ppl have swapped K20 in honda jazz/fit in USA but u need the right part for swapping which is mounts, electronic throttle body coz u want to swap in 2011 city which run by drive by wire, K-pro n few other things....it wud fetch u a lot as Immad100 said only K20a red top cost more than 4 lacs

[immad100]

^^^yes then swap cost,then electric works,then k.pro alone is like 1lac rupee:o,flash also works but kpro is kpro:),imo swapping a k20 costs way more than b18's b16's b20's f20's h22's etc,but atlast ''K'' is king of honda.hell lot of potential.seen it running at 17psi(k20a3) not k20AR,fetching 600 horses with greddy turbokit on ''STOCK'' intternals with kpro :o,well k20 is mighty,but unfortunately a k20A swap costs like a whole decently souped up 6th gen civic costs hahahaha...

[montie777]

thnx u guys for such a wonderful information ....wtb r18 engine witch comes with 8 gen civie?

[salik990]

thnx u guys for such a wonderful information ....wtb r18 engine witch comes with 8 gen civie?

R18a1 same engine from civic reborn.....maybe u ll find in shershah

[Badpigs]

u can fit a good big engine city got good room in the bay.A guy swaped in b18 in his city

that wasnt fruitfull at all , correct me if im wrong :S
(referring to: a friendly check)

[immad100]

@poster r18 is too a potential motor,btw whats wrong with your current motor??
swap is not always the only solution.

[immad100]

@salik heard that some r20's came there,is that true?

[wasay_ahmed]

that wasnt fruitfull at all , correct me if im wrong :S
(referring to: a friendly check)

infact ruiening the Car Better buy older car for such swaps.Yea if one is going for Identical swap like L15A etc
by the way wht u ppl say l13z stock head wth L15 vtec block?

[immad100]

^^^punga for free,only thing will be=increased displacement,more hassle=less gain.

[salik990]

@salik heard that some r20's came there,is that true?

i donno i ll ask someone bout R20 in shershah....maybe someone might do the swap in civic reborn but the prob is it comes in auto only

[salik990]

infact ruiening the Car Better buy older car for such swaps.Yea if one is going for Identical swap like L15A etc
by the way wht u ppl say l13z stock head wth L15 vtec block?

i ve seen few of the L13z engines lying in shershah 3 yrs back so i guess L15a7 i-vtec or L15a1 vtec might be available n wud be gud choice to replace the whole engine...L13z i-vtec head with older L15a1 vtec block is possible since both engine bore is same only stroke is different...but tuning wud be pain coz one is ivtec n other is vtec

[immad100]

i donno i ll ask someone bout R20 in shershah....maybe someone might do the swap in civic reborn but the prob is it comes in auto only

r18 tranny coples with it.
gain is not very much but increase in displacement=better response to mods.

[usman_younas90]

In the last there was big surprise Imad bhai