AoA guys hope ur in good health.Now this time i came up with another problem of overhauling engine of Honda 70, 2003 and after many many miles run on it its engine utimately come to an halting position and throwing smoke now i need to overhaul it and dont know a experienced mechanic in islamabad and rawalpindi guys advice me on findind experienced mechanic and from where Original Honda parts are available.i think it needs piston replacement & rings & seals maybe some other things too cant tell right now.
guys help me in finding a Qualified/Experienced mechanic for this job as once ovehauled by an experienced person engine lasts many many miles on it in islamabad/rawalpindi. and from where original honda parts available?as nowadays everyone claims to be but i dont think as the engine is simple even i can do this too but i dont want to end up in a real mess...:o
Dear, if you can afford than Honda Service Center, I&T G-10 Islamabad is the best mechanic
He is the most expansive mechanic, but no doubt, he know nerves of Honda 70
go? O muhammadi autos rwp and get a new pin pack engine of 70.Every mechanic will apply his expertise on it else
Sent from my WM8850-mid using Tapatalk 2
I would advise you to never use Japanese Piston Kit in your CD-70 engine, it will become a pain in the butt. Always go for Atlas's Piston Kit for CD-70.
I have had very bad experience with Japanese Kits and had to overhaul the engine three times in a month until i used Atlas's genuine Piston Kit.
how much does a new cd70 engine cost?
Thanks for the recommendation i ll surely call him for visit as im nearby.
didnt get u bro... you recommend me to replace engine intead of overhauling?
Thanks for the advice bro. well bro nowadays alot of 2 no parts are labled genuine atlas what would i do in that case and any cridible shopkeeper who sell the original parts at competitive prices.and it amazes me that japanese pistion kits are still available.
Using original Japani piston kit in my Cd70, no such issues at all.. seems like ur kharadia or mechanic was nehla!Brand name pata nahi kyun damagh sey nikal gya....?? yamaha and honda k original pistons usi brand k aty hen! And that is also more expensive than atlas honda piston, however yes.. go for atlas honda piston. its good enough
There is another option i.e. take your bike to any experienced mechanic try to get him with any reference then tell him the problem and then tell him to make a list of all spare parts and get them from any 3s dealer.P.S. Get anyone like your friend who know the bikes more than you to assure the quality product.
in rwp/isb the best and trusted parts shop is mohammdi ./ for mechanic cant say much .. as its just rebore which is ultimatlely done by kharadia .. i did few from mohamdi kharadia .. no issues with them .. mechanic na srf fitting karni hothi ha .. baaaaaaaaaaaas ..
he only recomends whch parts are ok which needs changing . however its recomended to change any part thats giving slight doubt ..
also take old parts with u back to home .. dont leave it to mechanic .
@asjdsm SIr gi aap say bike clearance set karna seekhni hai..Can you guide me??
Around 20-22 k
I think replacement is the best Option as local mechanics knows nothingSent from my WM8850-mid using Tapatalk 2
That Engine is of Chinese Brand, Not AHL Genuine So one has to sacrifice its original AHL Engine, that option is best for Chinese brands
OKI think you are mentioning IKYP Japanese Piston KitThat kit is classic and Muhammadi recommends and Japanese kit is cheaper than AHL Piston Kit.
Muhammadi Autos - Akram Mechanic is working, a Good Mechanic but the real problem is he don't give time too much only few handsand space at Muhammadi is also very limited, no seating arrangement etc.
good idea but problem is that none of my friend knows much about engine overhauling.
Mohammadi autos i think its on muree road maybe ive seen it name look familiar.and ll change doubtful parts as engines can not be opened every other day.thanks for the advice ill take each n every part back home even i ve seen some times mechanics put the old parts in thieir scrap parts drum.
yes the best option is replacement but it does cost alot.ive seen guys riding their bikes in a very very bad manner and thus they limit thier bikes engine life but amazingly they are still on the road after spending alot of $$ on their bikes.
if its only smoking then overhaul cost will be approx 7-8k with janyan parts and 3-4k with chinese ..