HONDA CITY 2016 Headlights low visibility suggestions required

[mudessir]

Hi fellow pakwheelers hope you all are in good spirit and enjoying ur rides.
I need help regarding my honda city 2016 headlights.I want to change the bulbs to increase visibility.I know nowadays people are using HIDs to solve this problem but for me HIDs are a no go as they do more harm then good.Now i am stuck with two options whether i should change the standard philips 55w bulb to higher wattage bulb or change the bulb with any good LED Bulb.Kindly suggest me what should i do as i also dont want to cut any wires and need a plug and play solution.

[mansoorautosfsd]

install koito japan H4 for best result . use 90/100 watts .if you are from fsd you can buy these from mansoor autos shoaib bilal market

[hassantahir2]

LED bulbs will also cause glare to on coming traffic just like HID'S.
Best bet would be to get a relay kit made that fit's connector to connector along with a seperate fuse for live wire. That would be a plug and play type of solution and wouldn't require any type of alterations to car's orignal wiring and then install any good 100/90 watt bulbs.

[mudessir]

Would that require relay or should i change these bulbs only

[mudessir]

Also please quote the price of these bulbs if you have them

[omar4494]

Why dont you look for night breakers and xtream visions. They too have 55w.

[xenerking]

i suggest you to use either Philips rally 90/100 Watts H4 tubes or Osram 80/100 Watts rally tubes.

i would recommend Osram as being long life and good visibility, Philips rally has lesser life, but plz make sure to get the original ones.

i remember there was one pakwheeler/ i guess Babar Khan in karachi dealing with original bulbs, i had good experience with him in past.

Night Vision/Extreme vision and other variants are two expensive and lesser cost to benefit ratio.

the ready made plug in play relay kits are available on Montgomery road to safeguard against headlight switch damage or any warranty issues.

[pwuser154490146484]

Bahi ma na apni honda city 2016 ma HID's lgaen jin ma full beam 5 seconds k bad tex hoti han. Long drive pr wo problm kr rhi thi. To ma ne H4 install kr di. Mgr wo b problem kr rhi ha light kam ha uski or low beam ma light puri ni parti road pr bht ziada pheli hui ha or full beam b nechy parti ha. Uska ab kia solution ha. Q k phly hi in pr bht kharcha ho gya ha. Plz Contact ma at 03088840007

[pwuser154404443270]

Go back to Hids. And the problem you quoted that it takes like 5 second for high beam to get hot. The solution is to just give a slight dipper after every 60-90 Seconds.

[roboxx]

Can we install any LEDs in foglights brackets instead of foglights?

[shahzaib62426]

Yes,I also change my h11 tubes with h11 led c6 but they have no light I expect.

[pioussoul]

I have replaced normal h4 with philipps racing vision +150 .
Now visibility is improved alot . Low beam is quite good but high beam is abit to high so it throws lesser light on road rest is parallel to the road

[crude101]

Hi mudessir. hope you are good. I had the same problem with my city 2015 (i believe they use the same Osram sylvania H4 bulbs in both 2015 adn 16). I would never recommend to use an HID, the ones offered in market. LEDs will scatter and in city's lamps, they scatter too much even more than corollas. I installed osram cool blue advance 5000k (original bulbs) in city and my corolla altis. Excellent vision. same 55w power and behtareen color temperature. Been using them since a year now without any problems.

if u can get them original, nothing beats them.