Honda City - Driver Side Roof joint of Windscreen leaking Water dripping from Pillar!

[bottlechain1]

I have a Honda City 2004, the water seeps inside & a small puddle of water is formed under my driving floor. I tried checking it in rain. It is from that corner of pillar & roof at the corner of wind screen it seeps in and drips slowly in cabin.

A friend denter tried sealing it with Silicon it only helped that the amount of water is very less now. If it rains whole night almost 200-300 Ml water now seeps inside the cabin. Please advise experts.

Who is best person to go to for a fix? Suggest any good reliable Windscreen shop in RWP/ ISB or another Denter can help in this?

Do I need to change weather strips/ Rubbers too ? or just a professional can seal it without having to remove whole screen and fixing it ?

[haroon47]

Im also facing the same issue in my corolla 2008. I tried to repair it myself by removing that gola. I could see white silicon on over the joint of Wind screen. I applied more silicon (the balck one) and put that gola back but of no use.

The seepage quantity of water is more in my case. After a good rainfall, I could see my carpet mats are wet. How to rectify the issue?

I think it a job of Screen fitting wala. We need to take the car to him. He can apply silicon in a good and proper manner to solve the issue. Im currently looking for said expert.

Are you from Lahore?

[bottlechain1]

I am from Islamabad. I went to various Denters, they Said screen will be pulled & refixed with fresh moulding & kit with new Silicon. I am going this weekend to a Windscreen hub, Saddar in Rawalpindi, as water seepage caused my central locking to burn. Its serious Issue if this goes inside the Dashboard.

[haroon47]

Ok. Please do update me about the resolution of your issue.

Mine is not that much Allahumdulillah but still the carpet gets wet.

[bottlechain1]

Bro I got the screen pulled out by Haseeb screen works in Saddar but they took me to their Gawalmandi shop as their fitter was on leave. 3 Guys started work & did a great job. Cleaned all rust / dust and particles on sides by a steel brush. Another guy cleaned windscreen sides by a blade to scrap off old molding & silicon off.
Cleaned & wiped the car sides with wet cloth & let it dry ..Applied soft molding / rubber kit & then good amount of Silicon was applied on top & sides on molding before the .screen was fixed back. Then applied lots<of Tapes to keep screen in place & told me to keep away from water & speed breakers for 2 days. Now today i have taken off tapes after 2 days. Rain would tell me how good job they did. Looks v good though.

Took only Rs 2000 inclusive of labor,molding & silicon and the owner was a nice guy pleasant to talk to.
Any one having this issue is strongly advised to get this fixed as it slowly rusts the car where ever water seeps through. Its not costly but took me almost 3 to 3.5 hours ( I waited for 30 mins to let silicon dry a little more)

[haroon47]

That is great if the issue is resolved. My car Allahumdulillah is rust free and i really dont think rust could have been an issue and causing water seepage.

When i did a DIY, it was super clean. Even the silicon was white transparent and had not turned yellowish.

[bottlechain1]

Finally found out issue was in joint of roof, under weather strip, got Puteen layers from denter for free & leak stopped , it was no leak of screen just a v v small joint under weather strip end near screen.

[bottlechain1]

Issue still there unable to find the leak! Need some expert denter contact in Isb / Rwp to get this issue checked!
Guys help !