Honda Civic 9th Gen Fan Club (2013)

[jklodhi]

Don't follow the forum. Here you would find a select few users who like to discuss everything about their cars, feelings etc 🤪

On a lighter side

[Thinking]

yes it does fit bolt on if u r getting orignal honda part.

[Thinking]

Aoa dear Fellows, i checked honda orignal coolant type 2 bottle which is recommended for civic rebirth as per manual. however the coolant bottle has thai language written on it. m not sure if its 50/50 premix or concentrate. can anyone guide regarding this.

[rajaahmed96]

Honda coolant is pre mixed.

[Thinking]

thanks sir. grateful. also any idea how many bottles will be required for replacing the coolant? car currently has orignal coolant in it and its 2015 model and 74k drive. However the sticker inside the bonnet says to replace orignal coolant at 200K kms or 4 years whichever comes first. so i assume its time to replace coolant.

[rajaahmed96]

Yes it will take Honda type 2 blue coolant. Make sure to drain all old coolant. It will take around 4-5 liters at max.

[harisahmedq]

Looking for 9th gen civic oriel rims. Any leads?

[pwuser158369978087]

I have a headlight problem in my 9th gen civic low beams. They’re wayyyy tooo high for me to see the road even. The headlight screw adjuster is for the HIGH beam and not the LOW beam. Low beam waala kidhar located hai? Cant see it honestly. And I’m fed up. (Low beams are on Halogens 9005 100W)

[sameerulhaq064]

[sameerulhaq064]

Also, change the headlight bulbs to 55W otherwise you'll burn the projectors.

[nawazish.alee]

Halogens are not really good in Projectors.
I've been using 75w HID 6000k in low beam for more than 8 months, Alhamdulilah No Problem So far. Visibility is far better than before.
But the High beam is still equipped with halogens (55w 9005) which isn't good enough at night when there's alot of incoming traffic from the opposite direction. Tried 55w LED but not satisfied. Previous HID's were not quick start therefore i removed them.
Suggest a Quick start HID 75W for High beam. SHould be a quick start because you need instant response from high beam.
Also planning to buy retro fitting projectors for Fog lights so that i can get better visibility without using High beam. Because I feel unsafe when driving at night in Overtaking Lane because of huge dump/Stones near divider.

[nawazish.alee]

Summer is here. using local green coolant.
Where can i get this Honda Type 2 Coolant ? and Price....
thanks

[Thinking]

brother low beams are projector beams with h11 bulbs. high beams are 9005. please recheck. also you can see the adjustment screw placement on the manual of the car.

[Thinking]

brother stock projectors are not designed for hid. if you are using hid in them it might burn them. have a look at it.

also in high beam normal halogen projection housing cant manage the disperse of hid and it will be a hassle if you install hid in high beam.

best you can do is to opt for good halogen bulbs like osram night breaker laser in low and high beam or high end led bulbs like philips zes ultinon.

hid are only suggested where housing is designed for them

[Thinking]

you can find honda orignal type 2 coolant from 1s dealers in saddar rwp or honda 3s. stick with orignal coolant. green coolant is not recommended.

[pwuser158369978087]

Oh my God. Are you sure? Ok I will.

[pwuser158369978087]

I purchased the car recently and didnt get the owner’s manual. It had c6 Leds in low beams which I replaced with halogens but the local dealer told me to install 9005 100w in low beams. I’ll get that changed probably. A brother has shared a picture of the adjustment, let me see over and hope I can find the low beam adjustment knob​

[sameerulhaq064]

Suggest a Quick start HID 75W for High beam. SHould be a quick start because you need instant response from high beam.

Install LED bulbs in the high beams
Also, projector foglights won't help in visibility as they're only meant to illuminate the sides and dead front of the car.

[pwuser158369978087]

I checked. I have h11 100w in my low beams. Also, couldnt find the screw for adjustment of the low beams :((((((((((

[nawazish.alee]

As far as i know, Projector housing is made of mirror lens not plastic lens. which makes its temperature rating high. and yes the high beam housing scatter the light too much. but some hids comes with reflector with them to control the dispersion of light. what about them ?
.
the halogens you mentioned, where can i get them ? and how can i able to know the product is genuine because these halogens are costly (same price as 100w HIDs)....
.
Toyota Corolla cars have very bright halogens. which brand are they ? any idea ??? Even Suzuki Bolan High beam is better than 55w halogens in my car.... :-/