Honda civic vti m/t 2005 ecu: 37820-pll-d02 (ER) needed

[sparkk]

Dear Friends,

Assalamo Alaikum,

My car HONDA CIVIC VTI 2005 M/T ECU malfunctioning so I need a working (new or used) ecu code#. 37820-PLL-D02 (ER).
So if anyone have or know where I can find this please reply.

Regards,

Spark

[uiv]

Dear Friends,

Assalamo Alaikum,

My car HONDA CIVIC VTI 2005 M/T ECU malfunctioning so I need a working (new or used) ecu code#. 37820-PLL-D02 (ER).
So if anyone have or know where I can find this please reply.

Regards,

Spark

Do you have stock engine or a swapped one? ECU for stock engine is almost impossible to find, your only hope is to find someone who has had their engine swapped, and buy them a matching one from junkyard in trade of their stock one.

[sparkk]

Do you have stock engine or a swapped one? ECU for stock engine is almost impossible to find, your only hope is to find someone who has had their engine swapped, and buy them a matching one from junkyard in trade of their stock one.

Thanks for your reply, Yes bro I have stock engine and looking for its ECU. Do u know anyone who is master to repair the faulted ECU?

Regards

[uiv]

Thanks for your reply, Yes bro I have stock engine and looking for its ECU. Do u know anyone who is master to repair the faulted ECU?
Regards

What's the fault? Have you opened it? Can you see a physical damage like a burnt spot or smell? Is it firing the engine? Do you have a solid CEL? Have you got it checked?

Repair depends upon the fault, mostly. There are many folks who could have a look, some should be able to repair.

Do post complete history and symptoms here, and let the experts to chime in. Good luck

[shaheryar.khokhar]

If VTi Manual and VTi Prosmatic have the same ECU then I might be able to help you out sourcing a new one

[sparkk]

If VTi Manual and VTi Prosmatic have the same ECU then I might be able to help you out sourcing a new one

Experts Please help that Prosmatic ECU can be use in Manaul VTI????

[sparkk]

What's the fault? Have you opened it? Can you see a physical damage like a burnt spot or smell? Is it firing the engine? Do you have a solid CEL? Have you got it checked?

Repair depends upon the fault, mostly. There are many folks who could have a look, some should be able to repair.

Do post complete history and symptoms here, and let the experts to chime in. Good luck

Apparently ECU seems not burnt and no smelling, may be its water damaged coz rust seen on the parts. Water leaves white stains on the internal side of ECU. Car running fine on this ecu with the check engine light on. ECU not detectable thorough the honda computer but on manual inspection its giving engine noking sensor code i.e. 32 or may be 23 so I have changed its nok sensor but the check engine is still there.
Therefore in this context please advise is there anyone ECU EXPERT who can fix my ECU.

Regards.

[pwuser157714915228]

I'm having a similar issue with my restoration of a beloved 2005 Civic Vti Oriel manual. I've swapped the original D16W9 engine out for a Japan spec D17A with an automatic ECU. I want to continue using my manual transmission, but need a manual ECU out of a Japanese D17A engine for that to really work and get to the 140 hp this engine is capable of with the right computer

[usmanrasheed971]

Yes i have ecu which one u want same part num

[Hassan1991]