How to install Push start system in Vitz 2014 from Bilal Gunj?

[irfanmansha]

I love push start system. Vitz 2014 F package doesn't have push start. Vitz smile package comes with push start.

Can i install Vitz smile package push start and Pessive keyless entry system in Vitz F package without any or much altition?

[saad.ikram.5688]

You will need to change the complete ECU with the one from a smart entry and push start car and get the door handles of that car too and atleast one key fob of that car after which you can use that to program more.

Definitely possible but quite difficult to source everything unless you find and halfcut and swap out the door handles but difficulty would be having a key of that ecu
Some shops can also program even if you have 0 keys but yeh sab kuch karna its a heavy project

[mshoaib432722]

I would not do that if were you. Its a HEADACHE to do that coz LOTS of things need to be changed to do this thing. And falling into hands of wrong electrician means MANY MANY MANY trips to Bilal ganj from that point onwards

[irfanmansha]

I had installed after market push start system with passive keyless entry and remote start stop. It was universal. Attached its 5 to 6 wires with car wires according to the given diagram. It worked perfectly. It's price was 16k.

[fastian04]

Go for the local option as yiu mentioned. Genuine installation is not just a cosmetic change and involve a lot of complexity.you may end up messing up your car's electrical system

[nawan885]

Get it done from Toyota 3s.. will cost u 15 to 17k

[irfanmansha]

@nawan885 Please explain what you have done from Toyota 3s?

[nawan885]

I have not done it from Toyota but was interested in push start in my vitz.. so Toyota capital Islamabad quoted me this rate 2 years ago

[kamranoorii]

Bhai jaan if some one need to install push start key less entry to vitz. Its total headache because you didnot find full kit. Which includes.
KEY LESS ENTRY ECU system, push start button, front doors handles with button, car boot handle with button and most important thing steering lock motor , and wiring with clips. Then you can make your vitz keyless entry. And also note you need experience electrition who can install n also program your keys. And security system.

[soulprovider81]

I.am also very much interested in getting push start for my vitz 2010 some told me that chines push start can burn your car. You have to buy the original one which 2nd cost hand is around 25k. Chines one image is shown

[ali.7861]

I.am also very much interested in getting push start for my vitz 2010 some told me that chines push start can burn your car. You have to buy the original one which 2nd cost hand is around 25k. Chines one image is shown

The product doesn't cause issue but the shitty wiring does

[saadtiger412]

Only get the project done by an experienced technician, if you intend to do so. Desi wiring can cause issues.

[fastian04]

Better not waste money..wiring will be messed up

[arshadahmed]

What about the steering lock ? You need an auto one , which unlocks without the key , when fob is near the car

[umarpk_2]

Atlast i have today converted my 2006 vitz key to push start.its working fine everyhting.it was realy a tough job if u dnt know the things.now i have gone through it if anyone need any help regarding this i wil help him.feel free to ask.things u need:dash board wiring of push start car
Smart card
door receiver
Antenas
Key
Starring lock
and door handles and wiring.
and diggi lock and wiring.
It may al cost u aproximate 20k
I also have my vitz old dashboard wiring and others things.if anyone need let me know

[pwuser153125026659]

Awr !!! Bro i need help i want to to get & instal this system in my vitz 2007 model i'm from Gujarkhan ,,, from where i can get all those necessary things and electrician Address Plz

[umarpk_2]

Contact me on whatsap
03132073624

[pwuser159264615444]

A.o.a
I want to install a push start button in my vitz 2007 model
Will you plz guide me with this modification..
03429437537 is my watsapp number...
Thanks