Hyundai Santro Fan Club

[bilal_masood91]

Thats a No.i am afraid.

[adidas]

no bdy to answr me??

Bros I bought it for Santro Plus 3 months back for 1800rs Chinese and its working perfectly.

[ibadaslam872]

Had my santro tuned today.
Changed the plugs:640rs
Changed a pipe related to throttle body:430rs
Labour:400rs
Petrol for cleaning throttle body:50rs

The car is now running on CNG and is moving like a charm.

[tauqeer78]

Hi...
I own santro exec 2003.....98k driven. i have some issues and wuld like to have some advice. the problems are
1. Idle rpm is unstable, it is ok when i starts the car but later it hovers around 1300 to 1500 rpm. Hyundai sowan has commented that throttle position sensor is not behaving...but is it reallly so?
2. My car runs rough on petrol, in the speed range of 30 to 50 kph. Actions i hav done so far incl change of fuel pump, fuel filter and spark plugs.....but am still wondering what more i should do as the problem is still thre
3. Shifting of gears have become very hard....applying reverse gear brings along very bad noise...i hav tried to fix it my self by adjusting the length of clutch cable but to no avail......do i need to change the clutch cable?
4. Last but not the least......any good santro maechanic in rwp and a place to buy the genuine spares
Guidance and advise is awaited please,

[iiqbal]

Got both of the axles of my santro replaced today since they started making noise after the rain season.
My bad i didnt inspected the boots earlier so resulted in this blunder. Got kabli genuine axles for 5k (both left and right). Hope they perform fine....
Looking for input about the price of the kabli axles....Is it ok or i am robbed....

If axles are CV joints , Seems like you have paid a lots

Hyndai sajjad charge me 4500 for both side CV Joint + 300 for labor

[iamadee]

yaar its "Gooday" in local language. Which ones are you talking about?

[Horse_rider]

what if i repair the gooday (CV joints/axles)? for how much it will be repaired and how long it will last? repair is recommended or not?

by the way ask from a parts dealer he was asking Rs. 1800/- for chinese copy and Rs. 5,000/- for original. a Mechanic told me that if these were not repaired before then it can be repaired to perfection.

anyone know or repaired his car's axles? how they repair it? what is the procedure?

[Horse_rider]

I have changed my rear springs few months ago, due to this my ride is a little bit looking high from the rear, i want it to be lowered again. anybody wants long springs for better riding rather than look can exchange his car's stock springs with mine after market almost new springs. (used for some months)

[Morani]

what if i repair the gooday (CV joints/axles)? for how much it will be repaired and how long it will last? repair is recommended or not?

by the way ask from a parts dealer he was asking Rs. 1800/- for chinese copy and Rs. 5,000/- for original. a Mechanic told me that if these were not repaired before then it can be repaired to perfection.

anyone know or repaired his car's axles? how they repair it? what is the procedure?

I had one of CV joints replaced about 6 months ago. I chose a chineese one. It costed 1000Rs and lasted only one day. Two days later i purchased a Korean CV-joint for 1800... It is working fine till now...

Don't go for the repaired one if you can afford a new one...

[Xplorer]

@Horse_rider
Repair method is very crude. They open the joint, fill the worn out areas with welding and then grind it with grinder. Chinese or Taiwanese will be much better than repaired ones.

[iiqbal]

yaar its "Gooday" in local language. Which ones are you talking about?

yeap i am also talking about Gooday ,Lahore Sajjad Motor charge Rs 4500 for new once

Replaced Gooday from them about 6 months back and Thanks God they are working fine till today

[iiqbal]

what if i repair the gooday (CV joints/axles)? for how much it will be repaired and how long it will last? repair is recommended or not?

by the way ask from a parts dealer he was asking Rs. 1800/- for chinese copy and Rs. 5,000/- for original. a Mechanic told me that if these were not repaired before then it can be repaired to perfection.

anyone know or repaired his car's axles? how they repair it? what is the procedure?

Lahore Sajjad Motor charge Rs 4500 for new once

Kharadia at Sajjad Motor told me don't go for repair

[Horse_rider]

Lahore Sajjad Motor charge Rs 4500 for new once

Kharadia at Sajjad Motor told me don't go for repair

what was the brand name, as sometimes 3S dealers don't have the OEM parts, and they used some other good Korean brands, how was the packing?

[iamadee]

looks like i have been robbed by the kabaria. Did they offer any warranty for the new ones and were they oem or korean?
I have been offered a 6 months warranty. lets hope they keep working well....

[iamadee]

what if i repair the gooday (CV joints/axles)? for how much it will be repaired and how long it will last? repair is recommended or not?

by the way ask from a parts dealer he was asking Rs. 1800/- for chinese copy and Rs. 5,000/- for original. a Mechanic told me that if these were not repaired before then it can be repaired to perfection.

anyone know or repaired his car's axles? how they repair it? what is the procedure?

Bro the price of the OEM axles (i.e 5000/-). Is it for complete set ?(i.e inner & outer pieces connected with a rod and both sides left and right)
Awaiting response....

[Morani]

Hi...
I own santro exec 2003.....98k driven. i have some issues and wuld like to have some advice. the problems are
1. Idle rpm is unstable, it is ok when i starts the car but later it hovers around 1300 to 1500 rpm. Hyundai sowan has commented that throttle position sensor is not behaving...but is it reallly so?

May be, may be not.. get a second opinion.

1. My car runs rough on petrol, in the speed range of 30 to 50 kph. Actions i hav done so far incl change of fuel pump, fuel filter and spark plugs.....but am still wondering what more i should do as the problem is still thre

Sorry i couldn't get the word "rough"... but still you need to take it to mechanic.

1. Shifting of gears have become very hard....applying reverse gear brings along very bad noise...i hav tried to fix it my self by adjusting the length of clutch cable but to no avail......do i need to change the clutch cable?

Did you check for the amount of Gear oil... Get it checked

1. Last but not the least......any good santro maechanic in rwp and a place to buy the genuine spares
   Guidance and advise is awaited please,

well, there are lots of good mechanics for santro all around. I personally go to Crown Autos (behind Fire brigade), Zero point.

You can get Genuine/Good Quality parts from parts dealer in saddar rawalpindi. Wajid Autos, Imran autos are a couple of names.

[ibadaslam872]

My santro is giving 40-50 kms in one tank of CNG

[Horse_rider]

Bro the price of the OEM axles (i.e 5000/-). Is it for complete set ?(i.e inner & outer pieces connected with a rod and both sides left and right)
Awaiting response....

I have asked from Fahad Autos (fraudia person) and Imran Autos both were asking same price for genuine Korean. I didn't check the packing myself but they told me that set of both left and right. Imran Autos 0515564952

[Horse_rider]

What kind of symptoms (other than tik tik noise on steering to either side) are witnessed when the axles go wrong? and what kind of difference/effect one feels after replacing the new axles (gooday)

[Horse_rider]

My santro is giving 40-50 kms in one tank of CNG

tune it from a reliable CNG mechanic. it is too low.