the filter of the intake kit wasnt at the right position before ,as the kit was installed in a hurry before the d series meet,we didnt notice y there was so lil space,even the battery wasnt properly in its position
so yesterday night a did a diy...
u can see the stock intake assembly parts which i took off,the intake box isnt in the pix.
the basic reason y i changed the position was i felt a gap in the kit n i was right
removed the first part of the intake
then removed the part from the throttle body as well
then i thought there shouldnt be a bend in the kit,so i assembled before installing it to see how its supposed to be.
i realised the filter was supposed to go in the gap ,behind the bumper,so i installed the kit back ,i even had to unbolt the fuse box so that the pipe could easily go in
then another mission was to put the filter in,as i had to options,eighter remove the light n put the fitler in put the light back on, or to open side of the bumper n put it in,
the last time i tryed to open the lights,diy didnt go v well as i had to open up all of the bumper
so i opened the bumper side,laid down on the floor na fter 30mins of struggle managed to put the filter in
diy successful as the car dsnt start or if starts it stops by v low idling if the intake is not properly placed & the sensor dsnt get proper readings 
started @ 11.30 got free @ about 2.15
aftermath of the diy 
had to take a bath again cuz had to go for eid prayers in morning
