Hy every one.
I am purchasing a new car battery and this time i want to do with Idealists approach.
I need all of yours help and suggestions to do it correctly.
There are 3 steps,
1) Choosing Battery
2) Right Electrolyte
3) Charging
Lets me tell what i am going to do for each these steps.
1) Choosing Battery
I have AGS GL85, this time i intend to buy equivalent Phoenix battery, Mainly i am following an advice to Get a battery with less plates (thicker plates). My UPS Phoenix Battery is going strong so giving this battery a chance for Car as well
Equivalent battery are of 70AH and 300+CCA, car specs mention maximum starter current of under 200A. So with these equations in mind i will chose a battery with minimum plates.
From Phoenix List, matching battery is XP88L 72AH, 13 plates
The smallest battery with L polarity is XP80L 60AH, 11 plates
IF i choose a slightly long battery then i have XP100R 70AH battery, 11 plates, but R polarity only
I think XP80L is a feasible battery. But i have no problem with AGS, Exide FB or any other brand as well if they have good repute.
2) Electrolyte
I have already ordered a 30 KG can of Pyro Battery Electrolyte. Much of it will be wasted. Any member from Lahore can take extra acid from me for his use.
I intend to keep/ hand electrolyte in pepsi bottles, plastic funnels etc. But owing to Xulfiqar sahb comment, i am thinking to buy some glass container as well.
3) Charging
I have a battery charger. i think its charge current is upto 15A.
Though i have a 2.2 ohm 10 Watt resistor available. If i use that i can slowly charge battery for a long time with small current. I think in this way current will never cross more that 1-1.5 Amps.
Also, i have in mind to let battery sit for 5-6 hours before putting it to charge.
Thats the plan gentlemen. I will highly appreciate comments by all learned members.
Thanks