Meguiars Products At Cheapest Rates In Pakistan

[omarabdullah022]

did you give curing time to the sealant? it requires to be applied and left to cure for around 15min, could be less then removed, see the instructions at the back of the bottle

I think the 'hazing' time is fifteen minutes and the curing time is about 8 houra atleast. Curing is after buffing off the waxor sealant and it bonds to the paint. You cant wash or layer another wax during this time.
@ahmad_yar bhai please clarify this..

Sent from my GT-I9500 using PW Forums mobile app

[omarabdullah022]

did you give curing time to the sealant? it requires to be applied and left to cure for around 15min, could be less then removed, see the instructions at the back of the bottle

I think the 'hazing' time is fifteen minutes and the curing time is about 8 houra atleast. Curing is after buffing off the waxor sealant and it bonds to the paint. You cant wash or layer another wax during this time.
@ahmad_yar bhai please clarify this..

Sent from my GT-I9500 using PW Forums mobile app

[faizandawood007]

Ahmed bhai applicator pad aa gy hy aap k pass???

[MADDYBOY]

i have black vitz please suggest me products for:

1. Rubber and black trim care

[ahmad_yar]

the paint looks like it has a really wet finish doenst it, a little too wet courtesy of recent rains in lahore
it was a fine test of Meguiars m21 sealant and meguiars gold class wax on the other two cars plus meguiars tyre dressing:P

water beading just after driving thru rain and flooded roads

m21 sealant

meguiars gold class carnauba wax 2.5 months old

4 days old meguiars enduarnace tyre dressing just after driving though flooded roads

on the suggestion of ahmed bhai tried out meguirs hyper dressing on tyres and it worked really well, gave a satin finish that i was looking for, you can dilute it to your liking and outstanding beading look how dry and clean the tyre is even after rain

1 week old hyper dressing

just for comparison no tyre dressing

i simply confused in first pic why u post ur home pillers but than i realized its car mirror reflections hahaha amzaing shot
@nd pic also excellent a fully detailed shiny reflecty ride standing in rain water hahaha
next time try Meguiars hi tech #26 paste wax its hybrid and its life longer than gold class

yes Hyper dressing can be applied on rubber , plastic and vinyle

[ahmad_yar]

after moving all the cars to ht permanent home which was not flooded was faced with the problem of cleaning properly and thoroughly as they were dirty in the quickest amount of time so used snow foam and pressure washer dried car properly then steam machine on unercarridge and lower bumpers and floor matts etc to ensure hygienic cleaning, gave a spray detailer wipe then, just goes to show how meguiars products offer really great gloss not only that but also outstanding protection in such conditions, its something we often overlook when choosing a product,

2.5month old meguiars gold class wax
DSC02137 by Arzaam Bhatti, on Flickr

m21 sealant

DSC02110 by Arzaam Bhatti, on Flickr

1 month old gold class wax
DSC02103 by Arzaam Bhatti, on Flickr

P.S the waxes and sealants were supplemented by other brands as well

Jazakallah Arzaam bhai for sharing ur beautiful rides , mashallah all are well maintained and appreciate ur feedback

[ahmad_yar]

Dear Ahmad yar, h r u? R u back to pakistan?? any updates to detailing stock and specially DA?

Dear Usman bhai
Gee Alhamdollila i am back Pak.

no more da polishers , all sold and new stock arround mid oct InshAllah

[ahmad_yar]

Happiness is Detailers Wipe on a sealed car, Megs M21 Sealant is just amazing, super easy to apply and remove, i did the whole car in like 20 min tops,

pls share car pics

[ahmad_yar]

ahmad bhai what abt my shipment im still waiting.need megs hi tech #26 paste wax n a buffing mf cloth.location quetta.how to contact you?

pls pm me ur complete address and i will send u bank details

so u need one #26 paste wax and a set of 3 supreme shine microfibers

[ahmad_yar]

Ahmad bhai, I'm looking for snow foam to be used with karcher foam lance, what do you recommend & what would be it availability/price ?

We had meguiars hyper wash and it wonders with foam lance if use 10:1 ratio but we sold out all very fast
it was one US gallon 3.79 liter rs 3100
now wait for new shipment

[ahmad_yar]

welcome back ahmad bhaiiiiiiiii

Jazakallah dear Sehroze bhai

[ahmad_yar]

AOA Ahmad Bhai

Welcome back to Pakistan!!!

Can you tell me where I can find the these two things;

1. MEGUIAR'S? VERSA-ANGLE BODY DUSTER

2. MEGUIAR ULTRASAFE WHEEL SPOKE BRUSH

They are available on TCS Connect but their prices are pretty steep as compared to the market in fact they are charging almost double.

Salams

getting in our next shipment and Inshallah our prices will be far less than market as usual

[arzaam.bhatti]

I think the 'hazing' time is fifteen minutes and the curing time is about 8 houra atleast. Curing is after buffing off the waxor sealant and it bonds to the paint. You cant wash or layer another wax during this time.
@ahmad_yar bhai please clarify this..

Sent from my GT-I9500 using PW Forums mobile app

yes i meant hazing time coudnt remember the word while typing so just wrote curing:)

[shereabdullah]

slam bro, washmits available??

[eagleeyez]

AOA

Can some body please explain me, that what are the per-requisites for applying M#21, sealant on the car?

and after applying the sealant,,,, do i have to apply something else also like wax.... or would it be ok that way....

THANKS

[amin_isb]

سدن بھائی جان

کچھ نظر کرم ادھر بھی فرمایں دس دن سے آپ کے جواب کا انتظار کر رہا ہوں

آداب

[omarabdullah022]

AOA

Can some body please explain me, that what are the per-requisites for applying M#21, sealant on the car?

and after applying the sealant,,,, do i have to apply something else also like wax.... or would it be ok that way....

THANKS

Sealants are synthetic waxes and they cover the paint with a layer of cross linking polymers.
Once bonded bonded properly, they last incredibly long and give an excellent hydrophobic surface. Drying your car is a breeze because most of the water beads and rolls right off. You can also rest assured that your paint is protected from uv rays from the sun, waterspots, contamination bonding to the paint, etc...

To make it bond properly you must have a surface free of contamination. Clay bar your car.
Then remove any polishing oils.
(Ahmad bhai can guide you on this). There are several ways to do this like giving an apc wipe or you can go professional and apply carpro eraser or af tough prep.

And yes you can add another layer of natural wax for additional depth

Sent from my GT-I9500 using PW Forums mobile app

[ahmad_yar]

Hello ahmad bahi,
Hope you had a fun China trip. I need the following products; I live in Islamabad so please also advise on how to transfer money and shipping charges

1. Water Magnet
2. Microfiber (set of 3)
3. Ultimate Wash n Wax

Thank you.

Ali bhai trust me no fun over there every day customer visits and have to eat difficult food

here u go some of pics i eat over there

about ur require stuff i am sending u pm about my bank details for the payment , pls make payment by sat morning as sat afternoon will despatch all parcels by leopard courier Inshallah

[ahmad_yar]

did you give curing time to the sealant? it requires to be applied and left to cure for around 15min, could be less then removed, see the instructions at the back of the bottle

I think the 'hazing' time is fifteen minutes and the curing time is about 8 houra atleast. Curing is after buffing off the waxor sealant and it bonds to the paint. You cant wash or layer another wax during this time.
@ahmad_yar bhai please clarify this..

Sent from my GT-I9500 using PW Forums mobile app

u both brothers are right , Arzaam bhai meaning also "hazing time " but he used word "cure"

yes its good if u give hazing time of 15 min to meguiars 21 sealant and than buffout residue as it will give better bonding time

i always prefer 2 layers of sealants for best outcome and protection so u can apply 2nd layer after an hour ( since same sealant so u can use 2nd layer with less interval ) and apply wax coat after couple of hours like 8 hours good enough curing time for sealants

better avoid water in curing time

[ahmad_yar]

Ahmed bhai applicator pad aa gy hy aap k pass???

early oct inshallah