The compound polish needs more rubbing. Almost 3~4 times than normal polish.
Because a constant rubbing allow compound wax to fill the light scratches on the body and stay there permanently.
The procedure is as follows
Wet your car with Water.
Apply surf/shampoo and rub it well.
Apply lot of water again.
Take a dry cotton fabric and dry all its surface well.
Apply compound polish on bonnet with your fingers or you can put on gloves.
Rub it in circles with cotton fabric or dry sponge. Remember it needs more rubbing than normal polish and push down your hand while you are rubbing it. OK? Its also called “making haze of polish”.
After doing it on all the bonnet, take some rest for 5 min.
Then take a dry fabric again and polish the surface with full speed and unless it starts shining.
Once done, then apply the same procedure on roof, then on doors and then on trunk.
But do these parts one by one.