Mitsubishi Lancer Maintenance Restoration After Partially fire damage

Other Car Automakers

mitsubishi

lancer

accident

Tags: #<Tag:0x000000096adb88> #<Tag:0x000000096ad9f8> #<Tag:0x000000096ad868>

abiiktk (Enthusiast ) 2018-12-19 21:49:59 +0500 #362

Still no shiny pics

omersiddiqui5482 (omersiddiqui5482) 2018-12-20 08:30:12 +0500 #363

@abiiktk sir i am out of town for a month. will be coming in the end of December and will continue. Inshallah. sorry for the delay

omersiddiqui5482 (omersiddiqui5482) 2018-12-20 22:51:16 +0500 #364

I have asked my brother to start the car for 20 mins every 2nd day till I am out of town so here is a pic...

dayrider (dayrider) 2018-12-21 10:01:23 +0500 #365

thats not necessary, tell him to start every forth day, and if possible, take it out for a short drive rather than just leaving it on idle for 20 mins

omersiddiqui5482 (omersiddiqui5482) 2018-12-21 10:08:28 +0500 #366

I will be returning next week so probably will be doing that myself.

dayrider (dayrider) 2018-12-21 10:20:19 +0500 #367

then tell him once it reaches optimum temperature, give it some gentle revs to about 3k rpm and keep it there for about 5-10 secs, so no deposits remain in the system

omersiddiqui5482 (omersiddiqui5482) 2018-12-21 14:47:50 +0500 #368

Awesum suggestion bhai. will definitely do that

omersiddiqui5482 (omersiddiqui5482) 2018-12-29 21:22:20 +0500 #369

So I am back from work and inshallah from tomorrow will continue the work. My target for tomorrow is get the suspension be overhauled, change all the boots, bushes, rubbers etc. Installing the power steering setup which I pulled out. Servicing all the locks and windows. One the windows is not working. Also all the foundations.

Tried really hard today at Plaza to find the air box pipe extension and the original specs door handles but no luck for that, although found original specs side mirrors for RS. 3000, power steering pipe original for 1500, some rubber for the boot lid it was not closing properly, bought original Aisin power steering fluid.

Hoping for the best need you prayers.

Pics for the mirrors more pics inshallah tomorrow.

omersiddiqui5482 (omersiddiqui5482) 2018-12-29 22:12:52 +0500 #370

Some morenside mirror pics. These need to be painted though

omersiddiqui5482 (omersiddiqui5482) 2018-12-30 19:02:24 +0500 #371

Took the car to the suspension Wala today. At door 11 I was at the shop. And at 5:30 was back home.

Had all the boots, bushes, nuts changed. Also one of the Kainchi as they call was bought new kabli for Rs. 1300. The total for all the suspeny work was RS. 4750, even installed the power steering setup but the pump then gave out and I will have to buy that one new... Also changed the front wheel bearings 4 of them costed RS. 2800. Foundations were changed for RS. 1050. Also installed an altered version of the Sheila's inside the wheel arches and under the engine bay. And had all the locks serviced.

Things remains are a proper body wash and some details. Else the car is now properly running.. also change the bonnet locks remote wire.

And the Sheilds...

The Kainchi as they call it.

Servicing the locks and the bonnet wire.

omersiddiqui5482 (omersiddiqui5482) 2018-12-30 19:29:11 +0500 #372

Also at the same shop where my car was getting repaired. This 1981 2 door charade came, it was a one owner self imported car in perfect original and immaculate condition. The best was that it was automatic. I didn't had guys to ask the owner if he is selling this cause he was too much attached to it..

Also the shop where you can get any rubber parts like foundations and other stuff made. The guy is really reasonable.

anon71378895 2018-12-30 20:28:00 +0500 #373

This post was flagged by the community and is temporarily hidden.

omersiddiqui5482 (omersiddiqui5482) 2018-12-30 22:53:43 +0500 #374

Bhai my came genuinely came with the hydraulic setup. I just took it out when she was going for restoration. Else yes EPS is a real good setup.

anon71378895 2018-12-31 06:55:27 +0500 #375

This post was flagged by the community and is temporarily hidden.

omersiddiqui5482 (omersiddiqui5482) 2018-12-31 08:42:10 +0500 #376

This never gave me any troubles until now when this pump gave out.

tahakhan125 (tahakhan125) 2018-12-31 08:57:59 +0500 #377

I am your silent reader . Mashallah great going in fast pace . BRO i have lost track after you said going for denting then will be painted after that did you posted pictures? that i may not have seen because after denting there is painting phase i missed that part. it will be very helpful if you guide on hard worked project for almost 2 years?

than i saw Senior Pakwheelers comment they were asking about same thing so i guessed 4 months almost passed you may have been so much busy .Sorry to disturb you

Best of luck for more work.

nfssaad (Saad Ahmed Khan) 2018-12-31 09:05:04 +0500 #378

location of this shop?

nfssaad (Saad Ahmed Khan) 2018-12-31 09:05:59 +0500 #379

your brake discs seem quite thin to me.... please consider replacing them

omersiddiqui5482 (omersiddiqui5482) 2018-12-31 09:10:29 +0500 #380

@tahakhan125 no need to say sorry bhai.
https://www.pakwheels.com/forums/t/my-car-caught-fire/555668/216?u=omersiddiqui5482

Continue from here bhai!

omersiddiqui5482 (omersiddiqui5482) 2018-12-31 09:11:55 +0500 #381

@nfssaad sir this shop is just opposite lucky one mall. called MK Autos.

Yes the Disks will be changed as for now as i am not driving the daily i went too keep the old ones.