Mitsubishi Lancer Maintenance Restoration After Partially fire damage

[shoaib657]

Salaam
Bhai salute bunta he Apke lie

[omersiddiqui5482]

Aisa Kya kardiya Bhai Maine?

[shoaib657]

Salute
Is lie k log chota sa accident ho jae to gari nikal dete hen aur ap Ek jali hui gari ki restoration ker rahe hen aur wo bhi lancer 88 jis k parts dhonda uffff
Time,money,patience,energy

[omersiddiqui5482]

Thank you for the appreciation dear... She is not just a car... If she was just a car I would have thrown it into junk months ago, she is kind of like my best friend she has always been there so it's my time to be there for her. Again thank you for the appreciation and need your prayers and support for the project

[shoaib657]

Best of luck brother

[saadtiger412]

Good luck. I subscribed.

[nnabeel]

Boss circled areas need special attention. specially the place where pillar meets the diggi and fender...its bend. it could be due to the metal lost its strength and the diggi is going down or maybe it got hit from left.

The rusty areas have to be treated or replaced wit new sheet metal.Uploading... Uploading...

[omersiddiqui5482]

Yes Sir,,, While standing outside someone hit the car from that side the BOOT LID is a bit out... Thankfully the C Pillars are fine i got them thoroughly checked. I will be uploading new pics today inshallah.

The denter also said one more thing that since these cars and their boots were not designed to accommodate a huge CNG Cylinder the weight of the cylinder and its movement also causes some metal and structure over time but thankfully the car had little damage in consideration to that,

Thankyou and i really appreciate your concern. i was not able to update due to eid ul azha and being busy a work. will update today.

[omersiddiqui5482]

u may also notice that the underside of the diggi has also rusted over time so this is also being changed with new sheet metal.

[omersiddiqui5482]

Well, went to the garage after many many days.. have been busy, even today I arrived late hence was not able to click alot as it was dark and the guy parked the car inside his shop... The 'c' pillar from right side has been doneto an extent, the cng cylinder has been taken out as well and he has done some work on the driver side of the car... The pace is real slow I observed so tightened them a bit... Hope everything goes fine..

[nnabeel]

boss this body needs full scrap and removal of polycade. pls adjust the gap between the diggi and the fender

[omersiddiqui5482]

yes sir the work is in progress. the denter has asked me to get a chemical which removes all the polycate and paint from the car but after the denting of major portions has been finalized, also the boot lid is now attached it was taken out to remove the cylinder hence it is just covering the diggi in the pic and seems to be out

[omersiddiqui5482]

Latest updates... Driver side is being finalized this week. Some lower door panels need to be replaced.... Which is being done... Suggestions are welcome

[omersiddiqui5482]

So I went to check up on the progress again... Since the footboard was about to be changed today... Was not able to click many pics as was looking to shock absorber for my father's lancer...

This under side will be sandblasted first... And then will be coated with an anti rust...

And today I was busy with repairing all of the suspension setup for the other lancer. Both the front shocks were changed and I was surprised to see that my father kept it on original shocks all this time... All the bushes mouldings ball joints we're changed... Steering rack was in good Nick no work needed there...

[dayrider]

what model is the other lancer

[omersiddiqui5482]

91'. It is a first owner.

[dayrider]

post some pictures of that too

[omersiddiqui5482]

Sure. will do that soon...

[khurem]

Boss, I admire your dedication.

Reminded me this timeless quote from fight club:

"The things you own, end up owning you".

[omersiddiqui5482]

@khurem thank you brother