MOC - M151 Owners Club, Pakistan

4X4 and Off-Road Vehicles

General 4X4 Discussion

pakistan

Tags: #<Tag:0x007fcabc614f98>

sherwan_88 (sherwan_88) 2009-10-28 07:33:00 +0600 #521

Has anyone incorporated a rear bar onto a mutt?

sarmadqureshi (sarmadqureshi) 2009-10-28 10:03:00 +0600 #522

Sherwan, clarify what you mean by the rear bar ?

aminfaheem (aminfaheem) 2009-10-28 11:16:00 +0600 #523

Dear All,

AssalamuAlaikum

I am Muhammad Amin Faheem from Karachi, recently have bought a MUTT M151A2, auctioned. Below are the pictures of the Machine as i bought it.

julyseventysix (julyseventysix) 2009-10-28 12:20:00 +0600 #524

wellcome on board fahim and congrats...

You are lucky to get one in complete form... m surprise to see front indicators, just like new....

Happy restoration....

sarmadqureshi (sarmadqureshi) 2009-10-28 13:57:00 +0600 #525

Welcome aboard. Nice machine you got hold of. How much did you pay for it ? Where are you going to restore it ?

sherwan_88 (sherwan_88) 2009-10-28 15:40:00 +0600 #526

Sherwan, clarify what you mean by the rear bar ?

[/quote]

aminfaheem (aminfaheem) 2009-10-28 16:37:00 +0600 #527

Thank you. @ Kamran and Sarmad.

@ Sarmad. I have bought it from Superhighway @ 125 K. He has around 15 to 20 more all are in gud condition. I have given the task to Iftikhar at Old Golimar. Engine is under overhauling and body work will be started from tommorow.

fahimsohail (fahimsohail) 2009-10-28 19:41:00 +0600 #528

dont give your mut to shakeel for paint work he will 2-3 months for paint work,iftkhar is a good denter.to whom you have given your engine for overhauling?

julyseventysix (julyseventysix) 2009-10-29 06:17:00 +0600 #529

Sam - My rigs horn button is broken and doesnt works...

Electrician has clamped a simple push button near indicator assembly....

Do you have any other solutions for it?

sarmadqureshi (sarmadqureshi) 2009-10-29 06:23:00 +0600 #530

KZ,
Mine was broken, infact my son pulled out the whole rubber and button and handed it to me.
For sometime I was without it, but then I got a normal puch button mounted within the same housing and covered that with a piece of rubber (motorcycle tire tube, cut to size & prued in the gaps). So far its holding and working ..... that's another story that my horn sounds like a toad with a sore throat.

sarmadqureshi (sarmadqureshi) 2009-10-29 06:26:00 +0600 #531

Sherwan,

If you go back a few pages, you can see Arif Shah's Mutt, he had something like it installed.

Think of closing the back ? Me too, i'm looking for a spare tire & gerry can housing to close the back. Have the ones on the side as well as the back. Like a Tow Tube carrier Mutt.

julyseventysix (julyseventysix) 2009-10-29 06:27:00 +0600 #532

I would like too see some closer shots. if possible

julyseventysix (julyseventysix) 2009-10-29 06:30:00 +0600 #533

Thats what i have thought also. Have ordered the second gerry can bracket actually.. Will share pictures of this back bar with an extra spare wheel and gerry can in next week.

sarmadqureshi (sarmadqureshi) 2009-10-29 06:35:00 +0600 #534

How much are you guys getting a spare rim for ?

julyseventysix (julyseventysix) 2009-10-29 06:44:00 +0600 #535

Have paid 3500 for the spare tyre and rim both... tyre is not in very good condition though...

Now looking for the sixth rim and tyre

Got following things recently:

Spare tyre and rim.
Stock AXE and Bailcha.
Black out light with bracket.
Side Spare wheel sheild.
Stock Wipers (Look beautiful).
Stock Windscreen.
Stock Fuel guage dial and tank guage.

kakakhail (kakakhail) 2009-10-29 08:39:00 +0600 #536

Sherwan, pictures of rear bar (door) attached, which I had fabricated on my jeep.

kakakhail (kakakhail) 2009-10-29 08:49:00 +0600 #537

Nice machine, Sarmad I noticed that the seat at the back is bench (original)and the hood rail is also lying there. I think the benck seat one's were regular jeeps and the one I had were used with RR guns, correct me if I am wrong..

sarmadqureshi (sarmadqureshi) 2009-10-29 09:54:00 +0600 #538

Welcome aboard. Nice machine you got hold of. How much did you pay for it ? Where are you going to restore it ?

[/quote]

Nice machine, Sarmad I noticed that the seat at the back is bench (original)and the hood rail is also lying there. I think the benck seat one's were regular jeeps and the one I had were used with RR guns, correct me if I am wrong..

Arif, Yes ... this one is the stock seat and the ones you have are after market ones installed in the back of Hiluxs it seems. Yours were single seaters, while this is a single big seat.

M825 (those with 106mm RR guns) had no rear, forward facing seats. It only had the operator's seats on top of each of the fenders, which you & I have.

julyseventysix (julyseventysix) 2009-10-29 10:00:00 +0600 #539

in other words M151 A2 has the big seat facing forward, while M825 has side seats.

Sam - Have got the hood rail in 1800 from a junk yard in lahore.

I am also looking for this big forward facing seat as well.

sarmadqureshi (sarmadqureshi) 2009-10-29 11:21:00 +0600 #540

Sherwan,
How's your luck with the law coming along with respect to the Mutt's color ?