Modification for Baleno

smimranali1 (imran) 2019-09-09 15:57:54 +0500 #1

HI Everyone,

I'm new to this forum, I have Baleno JXR I bought it brand new in
2005, and I have maintained it well I did't have any issue with the car
or its performance, now I'm thinking of modifying the car like changing
the bumpers or adding some extra lights. I saw in a forum on FB page
that a guy installed projector lamps in the headlights. my question is
that is it feasible does it improves the visibility.
my second
question is that i need to install retractable power mirrors where can i
find those for Baleno along with the original buttons.

sameerulhaq064 (Sameer Ul Haq) 2019-09-09 17:04:51 +0500 #2

Sir modifying Baleno with OEM parts is a very expensive hobby. Too expensive.

margallar (margallar) 2019-09-09 17:07:25 +0500 #3

Mirrors from bilal gunj. Headlights is an expensive project like 40 k ish...

I advise that you spend same money on brand new genuine parts for suspension and engine etc..

smimranali1 (imran) 2019-09-09 17:22:33 +0500 #4

suspension like what can I do?
where can I get the mirrors in Karachi ?

sameerulhaq064 (Sameer Ul Haq) 2019-09-09 17:33:16 +0500 #5

From Shershah. You can get them for around 5500 (after adjusting your old mirrors). Try not to do anything with your suspension. You'll make your ride stiff.

smimranali1 (imran) 2019-09-09 17:34:18 +0500 #6

yes I'm satisfied with the performance of suspension

sameerulhaq064 (Sameer Ul Haq) 2019-09-09 17:34:49 +0500 #7

Acha I'll be responding to your thread here.

sameerulhaq064 (Sameer Ul Haq) 2019-09-09 20:09:08 +0500 #8

smimranali1 (imran) 2019-09-10 15:48:18 +0500 #9

is this the full beam or normal

sameerulhaq064 (Sameer Ul Haq) 2019-09-10 19:40:01 +0500 #10

Low beam

smimranali1 (imran) 2019-09-10 23:31:46 +0500 #11

where can i get the projectors and projector lamps and how to do installation

sameerulhaq064 (Sameer Ul Haq) 2019-09-10 23:50:19 +0500 #12

Constact @KeiWorks12

abid110 2019-09-12 14:53:28 +0500 #13

post pictures of your ride. where in Khi do you live? i am in FB Area and own Baleno too

smimranali1 (imran) 2019-09-13 19:37:55 +0500 #14

Im in Gulshan Iqbal

smimranali1 (imran) 2019-09-13 19:40:03 +0500 #15

Guys I need your advice I need to increase the height of my baleno, and one other issue is that when ever anyone sits in the back my car goes down I just need to strengthen the shocks of the car what should I do.

sameerulhaq064 (Sameer Ul Haq) 2019-09-13 19:59:23 +0500 #16

Kindly don't reply the same things in multiple threads

abid110 2019-09-13 20:05:36 +0500 #17

I had same issue in my car. I just replaced cng walay springs at the back. Were very cheap.car height became too good .i have 14inch alloys too

smimranali1 (imran) 2019-09-18 13:29:49 +0500 #18

I need to modify the front bumber of my Baleno like this can anyone guide me where in Karachi I can get it done

sameerulhaq064 (Sameer Ul Haq) 2019-09-18 13:42:28 +0500 #19

Please don't.....

smimranali1 (imran) 2019-09-18 13:58:32 +0500 #20

what ?