My 2006 Altis, Ellen

[arzaam.bhatti]

oh and i had everything including the cam cover and lugnuts torqued to spec using my own torque wrench, never get your lugnuts tightened by the air impact gun as in most of my experiances they get very difficult to remove afterwards and service person may over tighten and damage them, torque wrench is the way to
go.

the torque setting for lugnuts is given in the hand book of the corolla.

IMG_2814 (1) by Arzaam Bhatti, on Flickr

IMG_2816 by Arzaam Bhatti, on Flickr

IMG_2817 by Arzaam Bhatti, on Flickr

[arzaam.bhatti]

when everything was completed they did a final check for leaks while i gave a once over with my OBD and watched the view on the front cam

the dealership still had the board from when this model was first launched back in 2005

[arzaam.bhatti]

also got myself a compression tester, dont need it for this or any of my own cars but its a nice thing to have in your collection, very essential to diagnosing engine health, infact if buying a old car i would quite like to take this with me and check the compression if in doubt before buying.

IMG_2282 by Arzaam Bhatti, on Flickr

[ab6666]

also got myself a compression tester, dont need it for this or any of my own cars but its a nice thing to have in your collection, very essential to diagnosing engine health, infact if buying a old car i would quite like to take this with me and check the compression if in doubt before buying.

IMG_2282 by Arzaam Bhatti, on Flickr

from where did u bought this?

Sent from my SM-N900 using PW Forums mobile app

[arzaam.bhatti]

from where did u bought this?

Sent from my SM-N900 using PW Forums mobile app

obd2cartools, they have a website primarily selling OBD scanners but the person also stocks apparatus like this.

[arzaam.bhatti]

also got some jacks and stands recently, 4 jacks as well as two pairs of jack stands.

[hamza_xeg]

What is the odometer reading currently ?

[arzaam.bhatti]

What is the odometer reading currently ?

60k km.

[hamza_xeg]

62k km.

Nice. Got any recent photos of the car ?

[syedmughees]

Mashallah you have nice ride, Could you please tell me how much jack stand cost you?

[nawan885]

also got some jacks and stands recently, 4 jacks as well as two pairs of jack stands.

@azeem.bhatti
can u please share performance..capacity and price of powered car jack...in 1st pic.
thanks

Sent from my SM-A510F using PW Forums mobile app

[nawan885]

@arzaam.bhatti

power jack reviews and price please

Sent from my SM-A510F using PW Forums mobile app

[Mun33b]

oh and i had everything including the cam cover and lugnuts torqued to spec using my own torque wrench, never get your lugnuts tightened by the air impact gun as in most of my experiances they get very difficult to remove afterwards and service person may over tighten and damage them, torque wrench is the way to
go.

the torque setting for lugnuts is given in the hand book of the corolla.

IMG_2814 (1) by Arzaam Bhatti, on Flickr

IMG_2816 by Arzaam Bhatti, on Flickr

IMG_2817 by Arzaam Bhatti, on Flickr

Can you please tell me from where u got these torque wrenches, and price too. Im particularly after craftsman one and not able to find any here.

[arzaam.bhatti]

Mashallah you have nice ride, Could you please tell me how much jack stand cost you?

thanks.dont remember the price of jackstands this was a while ago, but I dont recall them being expensive

[arzaam.bhatti]

@arzaam.bhattipower jack reviews and price pleaseSent from my SM-A510F using PW Forums mobile app

the power jack capacity is 2ton and it costed 2-3k got it from chuadhry auto store lahore.its performance is good, its useful if you have a elderly person in your house or back problems they can use this to lift the car on the roadside to change the tyre.

[arzaam.bhatti]

Can you please tell me from where u got these torque wrenches, and price too. Im particularly after craftsman one and not able to find any here.

Sorry not able to help in that, had given a list of things I wanted to a family friend who was a engineer and he found me those.

[Mun33b]

Sorry not able to help in that, had given a list of things I wanted to a family friend who was a engineer and he found me those.

Oh, no problem.

[margallar]

Can you please tell me from where u got these torque wrenches, and price too. Im particularly after craftsman one and not able to find any here.

while i do not know of a shop who keeps this brand, i do know that it is available on brandeth road

[Mun33b]

while i do not know of a shop who keeps this brand, i do know that it is available on brandeth road

Thanks for your reply, but i think brandeth road is a little too far away from Karachi :p. BTW any specific place in Karachi to look for?

[margallar]

woops, i missed your location. @xulfiqar knows the tool markets