My 2zz-ge Vitz sleeper

[xlnc]

AC ?

Please check your facebook...i have left u my number

[xlnc]

By engine balance ....i mean if there are any vibrations due to the modifications done to the engine mounts...you know how the engine sometimes doesnt sit right..? Speaking of vibrations...wht did u do to the axels p

[xlnc]

Text me bro 03329644469

[xlnc]

Bro come on lol

[Blindmanwatching]

By engine balance ....i mean if there are any vibrations due to the modifications done to the engine mounts...you know how the engine sometimes doesnt sit right..? Speaking of vibrations...wht did u do to the axels p

No there are no vibrations! there are four mounts for the engine, and that is more than enough to hold it in place.Under hard acceleration when traction is good the exhaust manifold knocks against steering box. To fix that I have brought a engine damper from the US but never got to install it(see the picture above) Axels are from an old Corolla and very easily available stuff. AC is working fine. And sorry for the late response! I never got a message on Facebook? you must have messaged some one else. Check private messages.

[dare_devil_d]

nice swap and power... would like to ride in it since m also from isb..ill poke you someday..maybe next weekend if your fine with it

[FaatehRehman]

Attar hostels

[haroon.virk]

Took the pics infront of the boys hostel :). What info do you need? let me know and I am here to answer!

Are you a NUSTIAN?

[haroon.virk]

Hi Everyone,

In October 2014 I got a 2ZZ-GE VVTL-i(1.8L with 187hp) swap done on my 1.0L 1KR JDM Vitz. Never got the time to post the pics and details but finally here they are. Also this is up for sale!!
The setup:

1) 2zz with C60 6-speed manual.

2) JDM M/T ECU

3) 2.5" Shortram intake with K&N filer.

3) 2.25" straight pipe exhaust. (later a turbo muffler was installed)

4) Bigger radiator with two fans.

5) Tein fully adjustable coil-overs

6) Lenso LS-GT ultra light weight wheels.

The engine sits on the original mounting areas with slight mods done to the mounts themselves. A new mount was also added to the front of the engine. All this was done without making any permanent[FONT=verdana][COLOR=#000000] changes to the vehicle frame.

Feel free to ask any questions or leave your comments.

What a nice setup and you hide it for this much time. I also planed to swap this engine.

Did you get this engine from front cut? Engine & ECU is out from which variant/model? From where you bought this engine? Swap & wiring was done from where?

You used C60 6-speed manual transmission, can you share a picture of the gear stick because in normal a car have 5-speed manual gear stick. Which gear stick and cables you used in your setup? I think you can understand what I am trying to say.

And why are you selling such a good setup?
Thanks.

[casperkhn]

@blindmanwatching

bro u want to sale the engine damper ,need for a project

[fasym]

Hello Guys!
I have swapped C60 in my RS Vitz 2013

[walls]

Hello Guys!
I have swapped C60 in my RS Vitz 2013

How's your experience going?
Share pictures
Share the cost

[pwuser157475714177]

Hiya Blindmanwatching what driveshaft did you use with the C60 transmission?
Cheers

[hamzasultan723]

Plz inbox video or can u give me ur contact number

[pwuser159502203470]

Hey man. Greetings.
Do you mind sending some more info and some pictures of what it is you did to the mounting brackets/engine mounts?? I’ve obtained a 2zz and would really like to get it in my VITZ. Also would I need my hubs changed aswell as axles??
Thankyou!!
Inbox so we can discuss please!! 🏽🏽

[Blindmanwatching]

Sorry guys, I let this forum die. If there are any questions, feel free to ask here.

Just to answer some of the questions above:

Driveshaft: I used the original Vitz hubs, but the outer CV joints and shaft of indus corolla was used(modified to fit the vitz hub). The inner CV joints matched what could fit on the C60 transmission and I do not recall the exact details.

Mounts: On the side, gear and back the original Vitz mounts were used. We fabricated adaptors that would fit on the 2zz and C60 gear but the mounts were stock. On the front though a new metal grader was installed under the radiator and a fourth mouth was attached to this.

[DUDE007]

Do you still own the car?

[Blindmanwatching]

No, I do not.

All I have remaining are the Tein coilovers, Lenso wheels, Tanabe lowering springs, and the radiator which I plan to sell off soon.

[devils_smile]

Bobs, still living in Islamabad or did you move elsewhere?

[Blindmanwatching]

Bobs, still living in Islamabad or did you move elsewhere?

Still in Islamabad chachu jee.