MY 86 Restoration , upgrades , DIYs , faults and many more!

[sinner__]

thats what m talking about
don t do like others when viewers get addicted the opener posts
car sold:P
best of luck with the car
by the way paint knsa select kia h?

hahhahah no i would never sell my car inshallah ! always trying to keep it with me warna my father and brother are after it to sell it ! paint is its orignal offwhite ! the code will be noted from chassis plate and then painted in orignal color inshallah !

[hidalgo]

@sinner
nice nice nice
rill looks good:)

[sinner__]

why dont you fix the timing belt size engine mount too at this time. remove mount, take a drill with hole driver and drill 2 holes in the chassis leg to accomodate the 100 series mount put a tube in them and a couple of long bolts tightened with nuts underneath.

OR, drill through the original spot welds and move the whole mounting ears to a new spot on the chassis leg and reweld it back.

OR, make an adapter plate with the mounting ears and drill horizontally in the chassis leg and tighten with appropriate pipe inserts, nuts and bolts.

which option will be perfect ? ! and i will be doing that ! the thing is the engine needs and overhaul and ill be doing that after a month or two when this paint job is done ! at that time i will move the mount system to the 100 place !

[sinner__]

why dont you fix the timing belt size engine mount too at this time. remove mount, take a drill with hole driver and drill 2 holes in the chassis leg to accomodate the 100 series mount put a tube in them and a couple of long bolts tightened with nuts underneath.

OR, drill through the original spot welds and move the whole mounting ears to a new spot on the chassis leg and reweld it back.

OR, make an adapter plate with the mounting ears and drill horizontally in the chassis leg and tighten with appropriate pipe inserts, nuts and bolts.

also i was thing of changing the block to 7afe 1800cc ! head will remain the same and will be over hauled ! intake manifold of 4afe (the bigger one) ! i would over haul the block too but i need a chang from 1.5 to 1.8 ! what do u think ?

[margallar]

PakWheels Forums - View Profile: khurum

tell this guy to send you a speedauto care kit. he owns the brand

[Vaqas1]

also i was thing of changing the block to 7afe 1800cc ! head will remain the same and will be over hauled ! intake manifold of 4afe (the bigger one) ! i would over haul the block too but i need a chang from 1.5 to 1.8 ! what do u think ?

BTW I have also heard people using 20v head on 5afe bottom

[Xulfiqar]

BTW I have also heard people using 20v head on 5afe bottom

that combination would have very weak torque.

[sinner__]

BTW I have also heard people using 20v head on 5afe bottom

yes the thing with A series is that u can interchange whatever u want and result will be a new thing ! but as xulfiqar said torque will be less ! why ? lol i really dont know my self

@ xulfiqar which one will be better ?
1.over haul this 5afe head and pace a new 7afe block with it
2 buy complete 7afe head + block

which one will be better power wise ?

[Vaqas1]

^ Complete 7AFE will be much better than this Adha Teetar Adha Bateer :p. But expensive as you will need NEW ECU and i guess wiring too..

Maybe you can use the old Gear of your engine but the gear ratio of 7A are bit different the first gear is bit different.

[sinner__]

^ waqas bhai 7afe assembly costs 40k wiring + ecu costs 13k ! he said i will take ur assembly in 4k lol ! gear yehe theek hay ! its in very good condition ! recentlly i opened the gear and there was no problem in it ! the problem was in cables ! ill check its code !

[sinner__]

UPDATES ! changed my mind again to 20v silvertop 4AGE ! im getting a best piece with UN CUT wiring and ecu in a very less price then 7a or 4a or 5a ! in exchange of my engine ! trans will remain the same ! so silver top decided ! will be changing it after 2 months in the 2 months ill make some budget !
now body UPDATE

painter has taken over and first he is cleaning and removing every piece of putteen ! the whole body's metal will be out and then best possible way to use less putteen ! pics coming as well as the hunt for GT emblems and other stuff ill show u guys what rare original emblems iv found
pics coming

[sinner__]

1.the GT one is for other grill which ill buy later
2.the red Toyota is for current grill ! right side lower corner its has its place and brackets originally ! will show that too when i clean and fit it
3. Gt twin cam ! this is for boot/trunk
P.S all the emblems will be cleaned and repainted professionally by me

[saadzae92]

very nice

I had to especially log into pakwheels for this thread

I really wished that you kept the DX front bumper .....I somehow like that (but that is my opinion)

try to keep it in a two-tone paint scheme (white/black goes great) black bumpers look ace on a E80 platform

Let me know when the project will be completed ......I have some super rare Japanese stickers that I need to let go (you will have to get them printed and promise not to let them fall into everyone's possession lol

thank you.

[sinner__]

very nice

I had to especially log into pakwheels for this thread

I really wished that you kept the DX front bumper .....I somehow like that (but that is my opinion)

try to keep it in a two-tone paint scheme (white/black goes great) black bumpers look ace on a E80 platform

Let me know when the project will be completed ......I have some super rare Japanese stickers that I need to let go (you will have to get them printed and promise not to let them fall into everyone's possession lol

thank you.

i was desperately waiting for ur post ! yes ur rite about the bumper but DX front bumper original lip is like finding a needle in a haystack ! its not available ! even these 86 bumpers lip is available one and i booked it ! bumpers will be strictly flat black ( the black with grains type look on them just like new bumpers have ) ! but still i would be buying DX bumpers and changing its looks year by year ! yes yes yes y not ! let me have the stickers i promise i wont give them to any one else

inshallah when its completed ull see how good it will be inshallah

[Xulfiqar]

the original DX bumpers give a more "stern look" to the car - the 86 bumpers make the car look "smiley"

The badges are great - will look good - and go finishing sake paint the front fascia of the car black before fitting headlamps, radiator and bumper. thats how its supposed to be anyway.

What rear lights are you planning the orignal DX style or the later JDM style.

[cristy]

very nice going bro.....
:)...
hope to see a masterpiece after all da work

[Vaqas1]

UPDATES ! changed my mind again to 20v silvertop 4AGE ! im getting a best piece with UN CUT wiring and ecu in a very less price then 7a or 4a or 5a ! in exchange of my engine ! trans will remain the same ! so silver top decided ! will be changing it after 2 months in the 2 months ill make some budget !
now body UPDATE
g

Nice. For how much? I am also thinking of goin for 7A or 20v in near future...

I guess silvertop will run on our normal fuel

One more thing silvertop got Airflow sensor and the later blacktop one got MAP sensor(Correct me if i am wrong) so I guess petrol will be the only option to run this car.

[babarhashmi]

nice decent job

[Xulfiqar]

Nice. For how much? I am also thinking of goin for 7A or 20v in near future...

I guess silvertop will run on our normal fuel

One more thing silvertop got Airflow sensor and the later blacktop one got MAP sensor(Correct me if i am wrong) so I guess petrol will be the only option to run this car.

yes the silvertop uses the "swinging gate" air flow meter and the black one uses a map sensor. adding CNG to the equation is nightmarish as the engine has 4 throttle blades the engine sucks in air in pulses rather than in a stream. Ive seen people do it but the engine ran out of breath at 4500 rpm - pretty gutless. Even the brake booster setup requires 2 check valves or you upset the load balance.

The demonic roar of the 4 throttle blades is addictive - and you specially would like it with a silent and civlised exhaust or a gated exhaust like the 8G galant had. it used a vacuum pod to "bypass" the exhaust muffler for a growling booming sound.

[margallar]

if you are going to use those emblems get them properly painted, they will look a million bucks