My Cultus Sound System

[abasitsp]

This is the current configuration of my Suzuki Cultus.

Current Configuration is

1) Pioneer 7950UB (MP3 & USB)
2) 2 Pioneer 307 D2 woofers
3) 718 Kenwood Speakers
4) Alpine Mid Range
5) Sony Xplod 2 way 4 inch speakers in dashboard
6) Cutting Edge 2 Channel (600 Watts) Amp for Speakers.
7) Cutting Edge 4 Channel (800 Watts) Amp for Woofers.
8) 2.5 Fard Capacitor
9) 55 Amp Battery with 65 Amp Generator.

Currenly when i go on high volume with medium low - medium frequency enabled fron deck the roof the the car generates a wave which produces a very irritating sound.

So is there any way to get his issue controlled.

[malikasad9]

system is really nice i like that tornado thats new thing i seen ever... nice

[sam007]

awesome system (y)

[l2k]

MAHSHAHALLAH nice system dude!!!

[raoaltaf]

I like it:) MashaAllah

[ahsan1702]

Nice mids.

No speakers in the front ?

[devilsadv]

What is the use of that tornado thing? what is it?
And how did u fit the woofers under the CNG?
is the cng company fitted?

[ahsan1702]

Thats a capacitor.

Used to provide watts to the amps as per requirment.

Its useless because when it discharges, it will charge from battery which means even more load on battery. You'll have to not play the sound system for that little while.

[sunny234]

nice system.

[abasitsp]

Well I have mounted 2 Sony Xplod speakers of 4 inch in dash board where there is company provided space.

Secondly my car has company fitted CNG so i had removed the cylinder at the time of fitting the system and then fitted it again.

I have done the packing on all the available space with foam and katcha rubber so that my trunk and other parts does not vibrate.

[BigNate]

nice system ...but where's the spare wheel .??

[jz]

nice system(Y)
how much did those alpine mids cost u?

[akila]

nice system in cultus how much 4 alpine mids range ?and u not giving it power by amp?

[booster]

model of ur cultus?????i also have a cultus.i also want to buy 307 d2,kenwood 718,cutting edge 2 channel amp for speakers and 4 channel for woofers.would be great buddy if u could tell me their prices.would be waiting for ur reply.

[abasitsp]

well i bought this car 0 meter in April 2007.

all of the setup costed me 70K+ including wiring and fitting as I had purchased all the equipment brand new. I dont exactly remember the cost of the equipment piece by piece.

This cost does not include the cost of capacitor as i got it from Dubai this december.

All the speakers and mids are getting power from amp as i have turned off the low frequency sound (bass) in the amplifier and the bass is only coming out from the woofers.

Secondly there is no spare wheel in the car for this i have replace the stock tyres with michelin tyres and have kept an air pump in the car in case of emergency.

[msm]

@abasitsp
Abdul Basit bahi if ur using 2 woofers than ur suppose to use 2 channel amp (idealy).. is ur amp is 800 watt/ch or 200/ch???
i might visit u than we will c how its connected... and dont worrie abt the roof remember Lancer and accord cant handle sound systems how come a suzuki can
to update u sound system of lancer is removed

@ahsan1702
capacitor usally used in this senario as a DC stablizer, not as a load distributer

[Vitzrulez]

@abasitsp
A1 system! DhUk Chee Dhuk chee! I really wana hear the bass.

[abasitsp]

msm for woofer i have placed a 4 channel amp and connected a woofer on each channel and only low frequency is enabled on these channels and high frequency is disabled on it.

As far as other 2 channel amp is concerned it has all the low frequency disabled and it is only processing high frequecy sound.

Well I live in Karachi so you guys can check out the system.

[fsx]

@abasitsp: i dont know much about sound systems of this intensity, but to my best understanding the ideal setup considering these amp and speakers should have been as follows:
4-speakers connected to 4-ch amp
&
2 woofers connected to 2-ch amp
OR
was there something else to your scenario for which you opted to connect 2-ch amp to all speakers and 4-ch amp to 2 woofers.

Please explain for my understanding.

[abasitsp]

Well both the woofers are of 1200 watts each and the 2 chanel amp is of 600 watts only which wont be able to handle the load of both the woofers.

For this reason I have connected both the amps on my 4 channel 800watts amp on seperate channels.

Currently I am planning to get hold of a mono amp for the woofers then I will switch the speakers on 4 channel amp.