New EFI Mehran Missing Problem

[turbo_charge]

If idle was fine and there were no jerks, then just directly connect hose from charcoal canister (black box) to throttle and drive for few days and observe if check engine light appears. Also observe the mileage and check if there is any starting issue. Do not cut paste the genuine wiring or connect any relay or you will simply void the warranty.

Yes will do this and test... warranty is very important otherwise there is no way to counter 3s guys if I cut paste wiring...

Sent from my SM-G530H using PW Forums mobile app

[umarkhan1]

Perfect.. relay is better...
Can voltage stabilizer works well?? I have one spare in my yard..

Sent from my SM-G530H using PW Forums mobile app

It won't do anything and I am sure that the ecu would be providing full 12V to the solenoid.
Check by your self

Sent from my iPhone using PW Forums

[turbo_charge]

It won't do anything and I am sure that the ecu would be providing full 12V to the solenoid.
Check by your self

Sent from my iPhone using PW Forums

Before relay or after installing relay??

Sent from my SM-G530H using PW Forums mobile app

[umarkhan1]

Before relay or after installing relay??

Sent from my SM-G530H using PW Forums mobile app

Before installing obviously

Sent from my iPhone using PW Forums

[turbo_charge]

Before installing obviously

Sent from my iPhone using PW Forums

Then where van be fault.. can any one know price of cultus valve so that I can replace and test

Sent from my SM-G530H using PW Forums mobile app

[turbo_charge]

So you are trying to tell that ECU is faulty and that is why those a## holes of 3S are reluctant to rectify this problem because they know that will cost them heck a lot of money? If Cultus purge valve is same, how about swapping that just for testing purpose?

From where I can get from one Islamabad??? Suzuki 3s guy is not attending my call any more now.... lol

Sent from my SM-G530H using PW Forums mobile app

[saboor73]

It won't do anything and I am sure that the ecu would be providing full 12V to the solenoid.
Check by your self

Sent from my iPhone using PW Forums

Purge valve operates on 9v btw I dont think its culprit as its suppose to open at high rpms (atleast that how theory goes) that op is experiencing jerk in low speeds

[harisabid]

Purge valve operates on 9v btw I dont think its culprit as its suppose to open at high rpms (atleast that how theory goes) that op is experiencing jerk in low speeds

Its not working on high rpm...its only work in low rpm...u can check my remove hose pipe from throttle

Sent from my SM-G925F using PW Forums mobile app

[turbo_charge]

Purge valve operates on 9v btw I dont think its culprit as its suppose to open at high rpms (atleast that how theory goes) that op is experiencing jerk in low speeds

At high rpms no jerks observed... problem only arises when going slow on lower gears at speed 0 to 20. After that car get smoother...

Sent from my SM-G530H using PW Forums mobile app

[saboor73]

Its not working on high rpm...its only work in low rpm...u can check my remove hose pipe from throttle

Sent from my SM-G925F using PW Forums mobile app

If we see it other way maybe it was open all the time thus engine jerking now the thing is you disconnected it left it open in engine bay fuel vapours in engine bay is alarming man

[harisabid]

If we see it other way maybe it was open all the time thus engine jerking now the thing is you disconnected it left it open in engine bay fuel vapours in engine bay is alarming man

Sent from my SM-G925F using PW Forums mobile app

[turbo_charge]

If we see it other way maybe it was open all the time thus engine jerking now the thing is you disconnected it left it open in engine bay fuel vapours in engine bay is alarming man

If it is stuck open already all the time and engine in getting rich mixture.. then valve is obviously faulty...
If I by pass this valve bat same hy jerks phr b wysy e rehengy...

Why no jerks in high gears and high rpms... if this open all time.. idling is also ok in cold.. little bubbling in hot

Sent from my SM-G530H using PW Forums mobile app

[harisabid]

If it is stuck open already all the time and engine in getting rich mixture.. then valve is obviously faulty...
If I by pass this valve bat same hy jerks phr b wysy e rehengy...

Why no jerks in high gears and high rpms... if this open all time.. idling is also ok in cold.. little bubbling in hot

Sent from my SM-G530H using PW Forums mobile app

Ap log bas hose pipe ko by pass kerlo...khud hi pata chal jayega...

Sent from my SM-G925F using PW Forums mobile app

[harisabid]

Ap jab throttle se pipe utaro ge throttle sucking air continuosly on idle rpm..jab ap race do ge to throttle sucking kerna chordega

Sent from my SM-G925F using PW Forums mobile app

[harisabid]

Let me tell.u one thing..mere neighbour ne li hai gari 2015 model hai .me ne us se poocha ke jhatkay marti hai us ne kaha ke nahi..me ne check kia tu pata chala ke us purge valve on rehti hai on idle rpm....

Sent from my SM-G925F using PW Forums mobile app

[harisabid]

Koi mileage ka bhi bata de ..kese setting hogi

Sent from my SM-G925F using PW Forums mobile app

[turbo_charge]

I have by pass purge valve and directly connect purge pipe to throttle.. weather is ok that's why proper check ni hwa... sound of air being sucked into throttle is observed... one thing I observed that pick increased a little....

Sent from my SM-G530H using PW Forums mobile app

[turbo_charge]

But this is not solution..

Sent from my SM-G530H using PW Forums mobile app

[harisabid]

Masla yeh hai ke ecu me purge ki setting nahi hai

Sent from my SM-G925F using PW Forums mobile app

[turbo_charge]

Ecu ka software update ho sakta?

Sent from my SM-G530H using PW Forums mobile app