Nissan B13 Restoration

[star2]

The Nissan Anti Theft Security System Device..... built in

Which relays are these ???? Have to figure them out...

Even stickers are intact on the wiring .... @ZEE82 You now know what I want and in which condition and yes, I am not hesistant in spending money :). Cheez honi chahiye.

This is a buzzer type device, don't know what it is ..... @SER_GTR ?? @ZEE82 ??

And now the other part of the loom.......

[star2]

^^^^^^ This is the male type SMJ Joint, which connects to the female SMJ Joint underneath the dashboard and goes directly to the Engine Bay, our most important and most needed wiring loom..... very critical....

[star2]

Oh Yes, I know what I have bought and what goes to where lol

This is the reference picture and routing for original B13 Wiring Harness for Dash Board, which I am going to get when we lay the wiring and keep it in my hand and on head of the electrician

This is the male SMJ Connector, from here onwards, wiring goes to engine bay.

I'll be surprised if it is some sort of DLC Connector

The Main Fuse Box

And the Relays are intact in the Fuse Box, excellent.

The only faulty thing in both looms the headlight connector of right hand side, yes, we need to replace that as it is broken/melt and ground wire is also coming out of it.

Damaged connector

I checked the other one, it was perfectly alright.

[star2]

The small fuse box, which is just at the side of the battery.....

The cooling box, love to see it has its Thermister with it.

The ZEXEL Thermister controller.....

[star2]

The denting progress for today.... Work is going at a fast pace......

The left side fender was under denter's hammer......

Diggi finished....... It had some minor denters..... so had to sort those out.....

[star2]

Engine bay progress...... Base applied and it is going to have another session of "manjai"

[star2]

Some more pics....

[Xulfiqar]

are you going for jap spec or REAL spec of matt black with a reflective barrier shield at the rear

[ZEE82]

the siren box can be for one of the threee purposes: either it wud be beeping with the reverse gear, or with thw steps of the ignition switches(as it does in reborn or so models to point out to the driver that he has left the key inside the switch andd leaving the car), or it wud be for the purpose of NAT,wen a someone tries it to start it with an unegistered keys, it il warn the driver that the car is uploaded wit NATs.
BUT...... according to my experience, it will serve for the second purpose, as i have seen for its beeping sounds for the steps 1,2 and 3 in the ignition switch...inside the user manual

[star2]

are you going for jap spec or REAL spec of matt black with a reflective barrier shield at the rear

sorry could not get u

[SER_GTR]

Just Play The DAMN thing And Listen How It Sound

It Looks Like IGN Bell ....And To Make It Work....I Think The IGN Key Switch Panel Is Different For These To Work....!!!

I LOVE The Chimes Buzzer IN TOYOTA's Mostly In OLD 90 Specs....That TIN TIN TIN Sound On IGN ON And When You Shut Off Car And Left Key Inside....!

New Ones Just Have TIIT TIIT.....Won't Impress Me

[IsbCap]

@star2

Excellent deal you got in 28K. Great work from @zee82

[SER_GTR]

I recieved 29 messages today at 10:00 PM lol :D. Don't know why I was not able to recieve message all day....

Anyways, be ready you will be accompanying me on Saturday, we will decide on spot what we purchase..... let the suspense prolong a bit

Apka Engine Decision Nai Hogaya......STAR PLUS Ka Drama Hogaya...Suspense Wala

[star2]

Apka Engine Decision Nai Hogaya......STAR PLUS Ka Drama Hogaya...Suspense Wala

Maza aa raha hey na

[star2]

@star2

Excellent deal you got in 28K. Great work from @ZEE82

Oh yes, so I have attracted you some how to see through these things (I wish some day you will give up your "lolly-pop" thinking as well )

[SER_GTR]

Evaporator Looks In Great Condition....All You Need Is Blasting Rotary Compressor With OEM Spec Charged GAS And Multi-Flow Condenser To Blast The A/C...

This Is Totally A New TOPIC......Will Do That Later...

WHat's With Anti Theft..??? How Will It Work.....You Got Any Keyless Entry To Activate It ???

[SER_GTR]

Maza aa raha hey na

Nai...I Am Losing My Interest In This Thread

[star2]

Nai...I Am Losing My Interest In This Thread

It is gauranteed, you will not

even some "high level critics" are following I am sure

[star2]

Evaporator Looks In Great Condition....All You Need Is Blasting Rotary Compressor With OEM Spec Charged GAS And Multi-Flow Condenser To Blast The A/C...

This Is Totally A New TOPIC......Will Do That Later...

WHat's With Anti Theft..??? How Will It Work.....You Got Any Keyless Entry To Activate It ???

Already got a multi-flow condensor, have posted pics of that with original bottle

[ZEE82]

Evaporator Looks In Great Condition....All You Need Is Blasting Rotary Compressor With OEM Spec Charged GAS And Multi-Flow Condenser To Blast The A/C...

This Is Totally A New TOPIC......Will Do That Later...

WHat's With Anti Theft..??? How Will It Work.....You Got Any Keyless Entry To Activate It ???

Its NATs doesnt come up with a keyless entry...but it only enables the registered keys to get the car started. no unregistered key with NATs will work, it wont start the car. I have already told the guy to bring the same key n key cylinder from that same half cut from which he brought this wiring loom....but its lying in TORKHAM