Philips Rally Headlight Bulbs (100/90W)

[ToxicDevil]

why useless?

[Talhadon]

why useless?

See the topic started date,Its been 4 years old thread....:o

[ToxicDevil]

I know that. I just thought that making a new thread for this wouldn't have been a good idea

[drwaqar]

can i install them in my w124 Mercedes?

[atif11]

yes it is compatible with almost every car , and they r best ever buy in this price , i have been using 3 sets in my 3 cars since 2 years and they r still working great as new not a single bit of a difference in light

[xain91]

can i install them in my w124 Mercedes?

Do remember to wire it with a couple of relays (for low and high beam) or you may burn your switch assembly!

[sami_voodoo]

is 98 civic powerful enough to power these 100w bulbs. I currently have 50 watt i think. Where can i buy original Phillips in Lahore

For these bulbs, you need to ascertain two things:

1. You have to see if the headlight lenses are glass. In a '98 Civic, I think that they might be plastic. Plastic (Lexan or Makrolon) will discolour under the extra heat of the 100W bulbs.

2. If the headlight lenses are glass, you have to check the fuses on the battery. The fuse for the headlight should be atleast 35 amps. If the wiring is not sufficient, you'll have to put in a relay from the battery.

Hope this helps,
Sami

[shahnawaz.111]

bro from which shop u bought these lights...can u name it?????

[ehtesham.taqvi.1]

Salam, could you please post pictures of the light vision from driving seat at night ? (im not allowed to get HID's installed) just want to check the colour of light if its like the stock ones or not. And does this bulb require a blaster ?

Thanks and awaiting the pictures

[mohsan87]

H4 - Philips X-treme Ultinon LED

Hello, I have installed Philips X-treme Ultinon LED in my swift. here is the product link and result images are attached. http://www.philips.com.my/c-p/12953BWX2/x-treme-ultinon-led-car-lamp [image][image] [image] Low Beam [image] High Beam Installation Instructions it comes with a driver box. and installation of bulb is same as other H4 bulbs. remove the connector from existing H4 bulb. remove the rubber release the clip from housing remove the existing bulb from housing remove…

[mrahiliftikhar]

Sir is it necessary to install relay with this Power of Bulbs.?

[Hassan1991]

Old thread.
Use stock bulbs. Otherwise you will burn the wiring and connector due to heat.

[Hassan1991]