i did some modification on my brand new honda city now the EPS light is on and the steering is hard like a bedford i scanned it with an OBD2 with torque no faults codes are shown @xulfiqar @capsat please help
what modifications exactly?
An ELM scanner with torque wont give you access to EPS or ABS codes.
You might have to jump the SCS line to cause the LCD display to show fault code.
But before i tell you HOW, tell us all the modification you did
Modification?like what swapped steering rack with toyota? Blown fuse under dash. Thats what happend to me once n yes your speedo nor odo meter will be working
Sent from my HTC Desire HD A9191 using Tapatalk 2
what is nature of modification please share details was it a DIY or some ustaad tempted you for NEW experiment at your cost over your new vehicle
problem resolved , the modification was a stupid chorr switch , just got the sensors refreshed from honda center
Chor switch .... (H) hmmm, may be Chor Switch worked by making EPS heavier too Much
Be careful with the manual procedure it can cause heavy expense if the faults are not fully rectified