little bit from my side
Bassheads! For serious performance, check out the Sony Xplod XM-3001SXD mono amp — an efficient, Class D monster that's stable down to 1 ohm. For instance, hook up three 4-ohm subs (a 1.3-ohm load) and the XM-3001SXD will crank out an awesome 810 watts — that's 270 watts per sub!
A variable (50-200 Hz) crossover lets you tune bass output for your car's acoustic environment. Add in MOSFET power supplies, MOSFET output stages, gold-plated, recessed connectors, and built-in bass boost (0-10 dB at 40 Hz), and you'll agree — the XM-3001SXD is the ruler of the low-frequency kingdom.
Important Note: A 4-gauge amp wiring kit alone is not sufficient for installing this amplifier. Please call a Sales Advisor at 1-888-955-6000 for wiring recommendations.
Details:
- Class D circuitry
- 300 watts x 1 at 4 ohms
- 600 watts x 1 at 2 ohms
- 1-ohm stable
- 50-200 Hz low-pass filter, 12 dB/octave
- 0-10 dB bass boost centered at 40 Hz
- MOSFET power supply and output stage
- speaker-level inputs
- gold-plated connectors
- 4-way protection circuitry
- 14-1/8"W x 2"H x 10-1/2"D
boshman american not chaines
A versatile car amplifier designed to form the core of a great sounding car audio system. It provides 4 x 85W RMS (into 4 ohms) channels and utilises a MOSFET power stage with overload protection. It is perfect for powering a pair of splits and a subwoofer simultaneously (2 channels bridged, 2 channels in stereo mode). Low pass crossover can be set at 80Hz - 1.2KHz. The high pass crossover can be set from 40Hz - 150Hz.
The 4x150WRMS BOSCHMANN Car Amplifier is designed by highly qualified mobile acoustic professionals using the finest and most durable high-end components in the industry.
Features
- Four Class "AB" High-current dual discrete Drive Stages
- Class "AB" Technology MOSFET PWM Power Supply
- Bridgeable & Tri-mode operation
- Variable Low Pass filter 50Hz ~ 250Hz
- Variable High Pass Filter 80Hz ~ 1.2kHz
- Super Bass 0dB, 6dB, 12dB at 50Hz
- Treble Boost 0dB, 6dB, 12dB at 10kHz(4CH)
- Chrome Plated RCA input, Power, & Speaker Terminal
- 3 Piece Chromed Stainless Steel Aluminium Cast Heatsink
- Soft Start & Muting
- Overload, Thermal, Short Circuit Protection
- Power & Protection Indicator
Specifications
- 4 Ohms Continuous Power Output (14.4V): 85W x 4
- 2 Ohms Continuous Power Output (14.4V): 150W x 4
- 4 Ohms Bridged Continuous Output (14.4V): 200W x 2
- 4 Ohms Max Bridged Output (14.4V): 600W x 2
- Low Pass Filter: 50Hz -250Hz (variable)
- High Pass Filter: 80Hz -1.2kHz (Variable)
- Frequency Response: +1/-1 dB @ 5Hz-50KHz
- Bass Boost: 0/+6/+12dB (Ch 1/2)
- Treble Boost: 0/+6/+12dB (Ch 3/4)
- Stereo Separation: >90dB
- Damping Factore: 200
- Signal to Noise Ratio: >100dB
- Input Sensitivity: 200mV ~ 6V
- Input Impedance: 22K ohms
- Fuse Rating: 25A x 2
- Dimensions: 270x53x320
