Post your AMP GUTS guys....everybody contribute!

[FC]

agaya hai

Sound Stream Pca2.760

[FC]

Sab say bhari amplifier

[Maggi]

Nice bed sheets

[FC]

ADS ratings
800rms@4ohm
1500rms@ 2ohm
1800rms @ 1ohm

T.H.D.: < 0.02%
Frequency Response: 10 Hz - 50 kHz
S/N Ratio: >115dB
Damping Factor: >500
Input Sensitivity: 0.15 - 12.0V
Crossover Slope: 12dB
Crossover Frequency: 50 Hz - 5 kHz
Dimensions: 10.75" x 2.6" x 20"
Variable high pass, band pass, low pass
Variable 18dB bass boost
Double sided glass epoxy SMT circuit board
PWM mosfet power supply
Tri-guard amplifier protection
SMT cooling fan built in
Tri-mode capable
Line output

[deathracer]

Nice bed sheets

lolx

[geforce]

cool
fc`s sound stream , even mospets are coated with insulation tube

[FC]

^^
FC ka ads to us say bhi zalim hai u can chck the ratings

[Maggi]

^^
ghar tak hila dia tha bhai

https://www.pakwheels.com/forums/d-i-y-projects/101358-car-audio-home

[soulhack3r]

My lil beast
SOUND MAGUS X-1502 is CLASS-D mono bass amplifier...
i donu much but here r the ratings guys ..

Functions

CLASS D MONO BASS
CAR AMPLIFIER

1500W x 1RMS(1 OHM, 14.4)
950W x 1RMS(2 OHM, 14.4)
600W x 1RMS(4 OHM, 14.4)

1 ohm load stable.
Double Side PCB and SMD components.
Adjustable Input level, LPF, Subsonic, bass boost function.
Advanced short circuit, overload, over heat and low voltage protection.
Easy bridgeable with same amplifier.
Heavy duty terminals.
Optional remote controller.

X1502 Specifications

RMS Power at 14.4V (into 1 ohm 50Hz THD+N < 2.5%)

1500 Watt

RMS Power at 14.4V (into 2 ohm 50Hz THD+N < 2%)

950 Watt

RMS Power at 14.4V (into 4 ohm 50Hz THD+N < 1.6%)

600 Watt

LPF frequency

40~180Hz Adjustable

Subsonic switch

Yes

Subsonic frequency

10~50Hz

Frequency Response

10Hz--180Hz

Bassboost frequency

30-80Hz

Bassboost gain

0~12dB

Low Pass Filter

24dB/Oct

SUBSONIC Filter

12dB/Oct

Operating voltage

DC10V--16V

Remote control

Optional

High-grade Nickel-plated, heavy duty terminal block type connectors

Yes

protection

Short circuit, Overload, over Thermal

Dimensions (HxWxD)

53mm x 228mm x376mm
Item Code: AM0SMX1502

And just got new 308s

yes maggi i knw nyc bed sheet

[mohsin129]

nice addition soulhacker !

[madhouse12]

My lil beast
SOUND MAGUS X-1502 is CLASS-D mono bass amplifier...
i donu much but here r the ratings guys ..

Functions

CLASS D MONO BASS
CAR AMPLIFIER

1500W x 1RMS(1 OHM, 14.4)
950W x 1RMS(2 OHM, 14.4)
600W x 1RMS(4 OHM, 14.4)

1 ohm load stable.
Double Side PCB and SMD components.
Adjustable Input level, LPF, Subsonic, bass boost function.
Advanced short circuit, overload, over heat and low voltage protection.
Easy bridgeable with same amplifier.
Heavy duty terminals.
Optional remote controller.

X1502 Specifications

RMS Power at 14.4V (into 1 ohm 50Hz THD+N < 2.5%)

1500 Watt

RMS Power at 14.4V (into 2 ohm 50Hz THD+N < 2%)

950 Watt

RMS Power at 14.4V (into 4 ohm 50Hz THD+N < 1.6%)

600 Watt

LPF frequency

40~180Hz Adjustable

Subsonic switch

Yes

Subsonic frequency

10~50Hz

Frequency Response

10Hz--180Hz

Bassboost frequency

30-80Hz

Bassboost gain

0~12dB

Low Pass Filter

24dB/Oct

SUBSONIC Filter

12dB/Oct

Operating voltage

DC10V--16V

Remote control

Optional

High-grade Nickel-plated, heavy duty terminal block type connectors

Yes

protection

Short circuit, Overload, over Thermal

Dimensions (HxWxD)

53mm x 228mm x376mm
Item Code: AM0SMX1502

And just got new 308s

yes maggi i knw nyc bed sheet

the first pic does not look like a pic of a mono amp..

[Maggi]

its c160 not x1502 lol

[ShaniDK]

Confusion ha g.. 1 pic 4 channel amp ki ha or 2nd pic or 3rd pic SM 1502x mono ki ha..

[soulhack3r]

its c160 not x1502 lol

naah hommi...its x1502
yeah the 1st ant the one...ma bad...

[soulhack3r]

Confusion ha g.. 1 pic 4 channel amp ki ha or 2nd pic or 3rd pic SM 1502x mono ki ha..

pa ji...the 1st pic ant the x1502 i jus had that pic saved uploaded it...anyway..the othr 2 r x1502

[9BL]

Well opening up amp needs a lot of extra time on hand I own a Alpine MRV F540 which is one of the most powerful amps made by alpine in a 4 channel

its much better than the local mumbo jumbo available but its expensive usually guys can setup a whole system in the price of that amp

[mohsin129]

^^^ pics or it didnt happen mate haha

try grabbing some off ROE...

[splfanatic]

shajeel getting naughty now

[yasirsa]

little bit from my side

Bassheads! For serious performance, check out the Sony Xplod XM-3001SXD mono amp — an efficient, Class D monster that's stable down to 1 ohm. For instance, hook up three 4-ohm subs (a 1.3-ohm load) and the XM-3001SXD will crank out an awesome 810 watts — that's 270 watts per sub!
A variable (50-200 Hz) crossover lets you tune bass output for your car's acoustic environment. Add in MOSFET power supplies, MOSFET output stages, gold-plated, recessed connectors, and built-in bass boost (0-10 dB at 40 Hz), and you'll agree — the XM-3001SXD is the ruler of the low-frequency kingdom.
Important Note: A 4-gauge amp wiring kit alone is not sufficient for installing this amplifier. Please call a Sales Advisor at 1-888-955-6000 for wiring recommendations.

Details:

• Class D circuitry
• 300 watts x 1 at 4 ohms
• 600 watts x 1 at 2 ohms
• 1-ohm stable
• 50-200 Hz low-pass filter, 12 dB/octave
• 0-10 dB bass boost centered at 40 Hz
• MOSFET power supply and output stage
• speaker-level inputs
• gold-plated connectors
• 4-way protection circuitry
• 14-1/8"W x 2"H x 10-1/2"D

---

boshman american not chaines

A versatile car amplifier designed to form the core of a great sounding car audio system. It provides 4 x 85W RMS (into 4 ohms) channels and utilises a MOSFET power stage with overload protection. It is perfect for powering a pair of splits and a subwoofer simultaneously (2 channels bridged, 2 channels in stereo mode). Low pass crossover can be set at 80Hz - 1.2KHz. The high pass crossover can be set from 40Hz - 150Hz.
The 4x150WRMS BOSCHMANN Car Amplifier is designed by highly qualified mobile acoustic professionals using the finest and most durable high-end components in the industry.
Features

• Four Class "AB" High-current dual discrete Drive Stages
• Class "AB" Technology MOSFET PWM Power Supply
• Bridgeable & Tri-mode operation
• Variable Low Pass filter 50Hz ~ 250Hz
• Variable High Pass Filter 80Hz ~ 1.2kHz
• Super Bass 0dB, 6dB, 12dB at 50Hz
• Treble Boost 0dB, 6dB, 12dB at 10kHz(4CH)
• Chrome Plated RCA input, Power, & Speaker Terminal
• 3 Piece Chromed Stainless Steel Aluminium Cast Heatsink
• Soft Start & Muting
• Overload, Thermal, Short Circuit Protection
• Power & Protection Indicator

Specifications

• 4 Ohms Continuous Power Output (14.4V): 85W x 4
• 2 Ohms Continuous Power Output (14.4V): 150W x 4
• 4 Ohms Bridged Continuous Output (14.4V): 200W x 2
• 4 Ohms Max Bridged Output (14.4V): 600W x 2
• Low Pass Filter: 50Hz -250Hz (variable)
• High Pass Filter: 80Hz -1.2kHz (Variable)
• Frequency Response: +1/-1 dB @ 5Hz-50KHz
• Bass Boost: 0/+6/+12dB (Ch 1/2)
• Treble Boost: 0/+6/+12dB (Ch 3/4)
• Stereo Separation: >90dB
• Damping Factore: 200
• Signal to Noise Ratio: >100dB
• Input Sensitivity: 200mV ~ 6V
• Input Impedance: 22K ohms
• Fuse Rating: 25A x 2
• Dimensions: 270x53x320

[9BL]

@Mohsin 129
there you go mate i dont need to pick someones ride to post pics when i say it that means i have it enjoy the orignal pics with my trainer on it
https://www.pakwheels.com/forums/car-entertainment-electronics-gps-navigation/128634-humble-addition-quality-my-car-alpine-mrv-f540-bose-am5