Project EG: Revival of the Glory

shabbir.1 (Shabbir Ahmad) 2012-10-17 14:48:59 +0500 #41

Nice to see a new member joining in..... Welcome eg6civic

shabbir.1 (Shabbir Ahmad) 2012-10-17 14:58:24 +0500 #42

Got the following speaker board which will replace the old damaged one..

dr3vil (Maalik ) 2012-10-17 15:06:59 +0500 #43

u making me drool over keyboard
i am the oldest lover of this car since child hood yes i am
good luck and i suggest only change the front bumper with mugen lip no need for fenders and bonnet and im sure ur eg will look apart from all riced up egs

shabbir.1 (Shabbir Ahmad) 2012-10-18 00:28:02 +0500 #44

I am looking for the back oem bumper, if any one has got one spare or he can help me buy one I will be highly obliged as it will avoid any delays in the progress of the project.

Regards

shabbir.1 (Shabbir Ahmad) 2012-10-18 00:41:34 +0500 #45

Can you please arrange the back bumper for me, as it is not available in whole of the shoba bazar Peshawar and Chah sultan Rawalpindi. Though there are two available in Chah sultan but they are damaged.
I hope you can arrange one in top condition and well below in price than the hatch bumper you got above.

Regards

shazo (shazo) 2012-10-18 05:05:13 +0500 #46

PM sent

shabbir.1 (Shabbir Ahmad) 2012-10-22 11:20:38 +0500 #47

Finally the car is in the workshop for dent removal/alterations/paint job
This how the Hatch fenders are modified to fit on the sedan....

cross checking his work....

Regards

shabbir.1 (Shabbir Ahmad) 2012-10-22 11:47:18 +0500 #48

Trunk lid shocks/dampers have been changed with fresh ones

shabbir.1 (Shabbir Ahmad) 2012-10-22 11:59:54 +0500 #49

shabbir.1 (Shabbir Ahmad) 2012-10-22 12:22:37 +0500 #50

As I showed in the beginning that the speakers shelf was badly damaged by the previous owner to fit bigger size speakers and a woofer. This has been replaced with a new shelf as follows:

Attaching the rear seat latch

trying hard to upload more pics but all in vain

amm (amm) 2012-10-22 12:42:46 +0500 #51

Mashallah nice going keep it up man !

shabbir.1 (Shabbir Ahmad) 2012-10-22 13:07:08 +0500 #52

Thanks amm brother, you are doing a nice job too. What primer (make and code) you used while painting your car?

Badpigs 2012-10-22 13:58:25 +0500 #53

Nycely done so far , keep the screen rubbers safe cuz they arent easily available - they ruin the look of the car if they aren't taken care of
I hope u got my point

Badpigs 2012-10-22 13:59:46 +0500 #54

Btw now is the time to remove the CNG
which engine are u going for ?

CoLd_FuSiOn (CoLd_FuSiOn) 2012-10-22 14:04:27 +0500 #55

Lovely project sir, good to see you restoring it to it's former glory to a clean stock look rather than souping it up. =)

Sent from my GT-I9100 using Tapatalk 2 Beta-5

shabbir.1 (Shabbir Ahmad) 2012-10-22 14:29:21 +0500 #56

I am keeping safe all the things which are getting spare after replacing them with new one. I have purchased most of the rubbers/weather strips/moldings and by next week I will upload their photos as well inshaAllah.

shabbir.1 (Shabbir Ahmad) 2012-10-22 14:38:32 +0500 #57

The cylinder was deliberately left intact so as to adjust its height to a point where it don't disturb the speaker shelf and at the same time the stepney is easily accessible :).
For the engine: D15B VTEC motor

Regards

Deadly_Flame (Aksum Qurban) 2012-10-22 16:02:02 +0500 #58

Mashallah!
I like this model of civic and am a big fan of "stockish" restored cars. Best of luck man. Hope it all turns out how you are seeing it in your mind atm

hamza_xeg (Hamza Sherazi) 2012-10-23 03:30:01 +0500 #59

Great project
good luck with the project

xaad (xaad) 2012-10-23 03:47:10 +0500 #60

great going.........