Project EG: Revival of the Glory

[pwuser150057152997]

thank you so much bhai were can i find Arshad. electrician in what area he has work shop or any way to contect him

Jazakallah!

[shabbir.1]

His workshop is there on the glass factory road in sultan ka koh. Don't have his number but if you visit sultan ka koh you will easily find him as he is well known in that area.

[pwuser150057152997]

thank you bhai for your reply,s really appreciate if i need any help i will contect you

Jazakallah!

[pwuser150057152997]

bhai which breaks pads do you use in yours civic,s reason i want to convert my car to abs system is when i apply breaks my car skids too much i am using mk breaks pads but befour i have used Nissin break pads too but no diffrence should i use ceramic pads

[shabbir.1]

bhai which breaks pads do you use in yours civic,s reason i want to convert my car to abs system is when i apply breaks my car skids too much i am using mk breaks pads but befour i have used Nissin break pads too but no diffrence should i use ceramic pads

Currently I have nissin pads in my car. Recently purchased bendix but they are still packed, didn't get time to install them.
Bad or worn out pads can be one of the reason for skidding but you may also need to change the brake oil and bleed the lines properly. Also type of type tires, thier condition and alteration done with ride height matters a lot.

[shabbir.1]

Remeber, if your braking system is not perfect, installing ABS won't help in this situation because as the car will try to skid ABS will be engaged.
Resultantly, your car will cover more distance to come to a halt, this way you may ram your car in the vehicle at the front, if you don't steer sideways.

[pwuser150057152997]

no bhai the car is stock and has honda original rims which comes with 2000 vti 14 inch the tyre size i am using is 185/70/R14 Dunlop SP Touring T1 befour i am using hankook same size bit no diffrence in breaks

[pwuser150057152997]

bhai kay karo kafi logo ko dakiya ha but no solution

[shabbir.1]

But there is one good news for you, as you will upgrade to ABS your whole braking system will be changed except few pipes.
So there is great chance that the car braking will improve as old setup will be replaced and any issue in the current setup will also go with the old setup both knowingly or unknowingly.

[pwuser150057152997]

bhai prop valv b change ho ga if converted to abs

[shabbir.1]

bhai prop valv b change ho ga if converted to abs

Yes, ABS setup has a 4 port proportioning valve instead of normally used 6 port valve.
Front two wheels are directly connected with ABS modulator while the rear two are connected through proportioning valve.

[pwuser150057152997]

then why 6 ports in abs pump motor

[shabbir.1]

Two ports are connected with the master brake cylinder (1 is incoming line and second one is return line), two goes in the front wheels (one for each wheel) and the remaining two lines terminate inside the proportioning valve and from there they extend towards the two rear wheels.

[pwuser150057152997]

ok bhai thank you so much u have helped me a lot thanks

[shabbir.1]

Don't have much idea about the tyres but they should be soft for better road grip and handling. Yes, you may send the pictures.

[pwuser150057152997]

bhai ap na ya sara abs wala kam peshawar sa karwaya hy ya saman ide rwp sa lea hy
i have called Nawaz Autos and gives your reference i knows u very well he says aw jay ho jay ga

[shabbir.1]

95 civic
suspension stuff purchase = peshawar
wiring and ABS equipment purchase = pindi
suspension parts installation at = peshawar
complete wiring done at = peshawar

2000 civic
suspension stuff purchase = pindi
wiring and ABS equipment purchase = pindi
suspension installation at = peshawar
complete wiring done at = pindi

[pwuser150057152997]

to bhai pindi ma ya abs wiring kdr sa karwi hy or ks banda sa karwie hy plz tell

[rajaahmed96]

Your car skids from rear?

[pwuser150057152997]

front wheels