Soldering iron is a must for DIY people. It takes care of loose joints which results in sparking
This is the stand for soldering iron ... however, it was packaged in broken form and needs to be replaced
I also bought some paint spray cans ..
Last night, I also visited a shop dealing in chemicals and I bought fiberglass, resin and hardener. He had limited supply of resin (about 1 kg).
These are disposable gloves for use during fiberglass fabrication
This is the resin. It has a small quantity of cobalt mixed in it. We did not know about the ration of resin and cobalt, so we requested the shopkeeper to mix it in the desired ration for us
and this is the fiberglass material ..
Brush for applying resin on fiberglass layers
You guys must be bored with all the DIY shopping, so here is a pizza ...
Lest I forget ... I found Blue LED lights for the trunk as well. As they were left in the car last night, I could not take their photo.
They looked somewhat like this ..
I am yet undecided about location of the LEDs in the trunk, but if they look alright (which I am sure, they will), I am thinking about couple of small blue spotlights as well.
The designs I thought were already shared here (most of them). I wanted to add some shashka. The area is very small plus IMO CNG has to be removed. Tell me one more thing that what things you want to have in the trunk. In all design layouts i see only 2 woofers and one amp. Kindly specify. I am free whole night so I'll be waiting for your reply. I also thought of a very sick design but it would be a big headache + i cant draw it on PC and I dont have camera right now to take snap of my drawing. I'll give you the rough sketch. Secondly please upload a photo of trunk with only CNG cylinder or with woofers (front view).
Sir Great, Looking forward to great DIY
Sattar bhai, I am liking these pictures more than Pizza! (H)
kiya chal raha hay bahiyo aklay aklay