Project "Laadli" - My Toyota Corolla GLi 2010

[madhouse12]

ahhhh just got home from a tiring evening of work. pics coming soon...

[istafa111]

ahhhh just got home from a tiring evening of work. pics coming soon...

Good Good...

[askhokhar]

Aslamualaikum and a very good morning to all dear friends

@ Abdullah Bhai ... I can very well imagine the difficulties in putting ideas together which can fit into limited space.

We all joined hands and created many designs .. I am sure they were all very good. However, when the practical implications come in, then we have to be realistic. This is so true.

Corolla has a huge trunk but the real issue surfaces when we have to design the layout while keeping the CNG tank in its place.

The designs I thought were already shared here (most of them). I wanted to add some shashka. The area is very small plus IMO CNG has to be removed. Tell me one more thing that what things you want to have in the trunk. In all design layouts i see only 2 woofers and one amp. Kindly specify. I am free whole night so I'll be waiting for your reply. I also thought of a very sick design but it would be a big headache + i cant draw it on PC and I dont have camera right now to take snap of my drawing. I'll give you the rough sketch. Secondly please upload a photo of trunk with only CNG cylinder or with woofers (front view).

[askhokhar]

Abdullah Bhai ... we got many things done ...

Aaj aap log khush ho jaen gai

Sir Great, Looking forward to great DIY

[fouadbakht]

Waiting anxiously for the pics Khokhar and Arslan bhai.

[askhokhar]

Chalain aaj say aap kay liye khanay ki photos band....

Really .. when I see something nice on the table, I think of you in Cheenas and their foods ...

Sattar bhai, I am liking these pictures more than Pizza! (H)

[askhokhar]

Actually we did a lot of work yesterday, and that is precisely the reason why Madhouse just posted a single one-line message, and I posted nothing ...

kiya chal raha hay bahiyo aklay aklay

[askhokhar]

It was a working day for Madhouse, and yet ... he put himself in "Overdrive" and we completed lot of progress.

I took lots of photos ...right now being uploaded to facebook .... There are 200+ plus photos ... however, the internet has been slow since yesterday ... so it is taking time in uploading the photos

:):)

ahhhh just got home from a tiring evening of work. pics coming soon...

[askhokhar]

It is such a pleasure to share all the news with you brothers ...

It is tiring to work on the car, but all the fatigue goes away when so much encouragement comes from the brothers ...

Last night, Madhouse and I did discuss posting on PakWheels .. but then we decided to postpone it till the next day, so we could play our part in the installation ...

Well ... Madhouse worked till midnight ... and my work started after midnight.

I took photos while Madhouse worked, but there was no one to take photos when I worked .... so unfair!!!

Just joking ... what he did was important .. and what I did was kind of spadework ...

Good Good...

[askhokhar]

It has been 45 minutes and only 70 photos have uploaded so far ..

The net is so painfully slow today ...

[askhokhar]

The photos are uploading ... about 125 uploaded, and my laptop battery is about to exhaust. It is loadshedding time and still five minutes to go.

It would be a pain in the backside, if I have to upload the photos once again

[askhokhar]

Finally, 204 photos uploaded on Facebook, so now we can start.

[askhokhar]

Yesterday, after the office I drove to Westridge to the carpenter Mr. Yasin Mughal ... he has been handling Madhouse assignments, and after spending the day with him, I could know why he was so strongly recommended by Madhouse.

We started with measures of the trunk

[askhokhar]

The subwoofer enclosures, temporarily installed Sound Stream amp and the the CNG cylinder partition were removed to have a clear picture of the space available to us for modeling ...

[askhokhar]

Cell phones are a sure distraction ...

[askhokhar]

The CNG Cylinder partition ..

[askhokhar]

We discussed the material options and finally decided for Imported Malaysian Lasani board. We bought one 8X4 sheet..

Mr. Yasin is in the process of cutting the first board for upright wall.

[askhokhar]

[askhokhar]

after marking the two points, a ruler is being used to draw straight line on the Lasani board

[askhokhar]

Cutting the piece from the main sheet