Project "Laadli" - My Toyota Corolla GLi 2010

Toyota

Corolla

Tags: #<Tag:0x000000068b4128>

askhokhar (askhokhar) 2011-05-09 02:57:26 +0500 #2881

askhokhar (askhokhar) 2011-05-09 02:59:41 +0500 #2882

It was quite difficult to apply resin and fiberglass within the wooden cage ... but it had to be done

askhokhar (askhokhar) 2011-05-09 03:01:26 +0500 #2883

askhokhar (askhokhar) 2011-05-09 03:04:25 +0500 #2884

askhokhar (askhokhar) 2011-05-09 03:05:44 +0500 #2885

askhokhar (askhokhar) 2011-05-09 03:07:10 +0500 #2886

askhokhar (askhokhar) 2011-05-09 03:08:21 +0500 #2887

askhokhar (askhokhar) 2011-05-09 03:09:45 +0500 #2888

Bad angle ...

askhokhar (askhokhar) 2011-05-09 03:11:14 +0500 #2889

All the gaps, cavities and crevices filled ....

askhokhar (askhokhar) 2011-05-09 03:12:44 +0500 #2890

askhokhar (askhokhar) 2011-05-09 03:13:11 +0500 #2891

askhokhar (askhokhar) 2011-05-09 03:14:05 +0500 #2892

askhokhar (askhokhar) 2011-05-09 03:18:30 +0500 #2893

While the new FG joints were drying, I decided to grind off the blisters on the outer surface of the enclosures ...

Blisters are formed due to heating of the trapped air in layers of fiberglass as the FG strands reacts with the resin and hardener in an exothermic reaction

askhokhar (askhokhar) 2011-05-09 03:28:46 +0500 #2894

askhokhar (askhokhar) 2011-05-09 03:29:56 +0500 #2895

Now working on the second enclosure

askhokhar (askhokhar) 2011-05-09 03:34:10 +0500 #2896

askhokhar (askhokhar) 2011-05-09 03:36:11 +0500 #2897

Now the next batch of photos is being uploaded .... we need to wait for a while

Sorry to keep you waiting
.

askhokhar (askhokhar) 2011-05-09 04:26:11 +0500 #2898

We can start now ... the next batch of photos uploaded ....and ready for posting

askhokhar (askhokhar) 2011-05-09 04:30:38 +0500 #2899

Removing screws from the base of the support structure ...

askhokhar (askhokhar) 2011-05-09 04:34:39 +0500 #2900

MashaAllah ... it is page 150 :-)

Three of the screws were easy to handle, while the fourth one became difficult