Project Land Cruiser FJ70 aka RKR

Tags: #<Tag:0x007f3fbacd60a8>

taimoorkhan (taimoorkhan) 2012-07-05 10:48:53 +0500 #21

thanks sir. Will do it

taimoorkhan (taimoorkhan) 2012-07-06 11:19:46 +0500 #22

Got all the brake lines and other brake accessories replaced including the brake booster assembly (had to change 3xboosters in order to get the right combo).

One alteration we did was to add a vacuum assisted clutch Master Cylinder. The brake booster assembly of a Vitz was used for the purpose. The alternation was worth as it improved the driving comfort of the vehicle (As the vehicle is to be used by my father occasionally).

Power steering box from a toyota Prado was also added which was bolt on swap.

taimoorkhan (taimoorkhan) 2012-07-06 11:25:33 +0500 #23

the pump installed and the engine bay ready to receive the engine. Also the dash board removed for wiring

adeel_malik (adeel_malik) 2012-07-07 19:14:53 +0500 #24

@ Taimoor Khan

So finally ud hands on a new beast.seems mine baby got a twin.BOL for project and do work on places underneath the body.those r the one got rusted mostly.secondly CNG is feasible on 3F and ud tested on mine rig as well.

bol for project though.

cheers

taimoorkhan (taimoorkhan) 2012-07-08 13:58:30 +0500 #25

thanks man. Ur ride's got a big brother Come over to my place sometime and will discuss the resto details

AZEEMMAJEED (AZEEMMAJEED) 2012-07-08 14:08:36 +0500 #26

Great project

taimoorkhan (taimoorkhan) 2012-07-09 06:35:47 +0500 #27

^Thanks Buddy

taimoorkhan (taimoorkhan) 2012-07-09 06:50:20 +0500 #28

The were looking for 33 in Mud terrain and had to do a lot of khawari in pindi markets as well as Peshawar. Eventually we settled for yoko geolanders M/Ts in 33 inch with 15in hollow rims. I hope that the tires dont make the jeep heavy on fuel.

Any advice on the tire pressure for these tires. Some said 15 psi.

The tires/rims costed a lot and were a big dent on our budget: P

hayzin (hayzin) 2012-07-09 07:44:49 +0500 #29

^thats a nice set of shoes you got there.
I recently got myself a set of 33x12.5x15 Savero.

dearsaad (dearsaad) 2012-07-09 08:20:15 +0500 #30

Great efforts into the project...... I think that you are missing many minute details.... like the event when it was first time tried to start the engine and the starter motor was screwed by _____ due to throwing water on hot motor...... and you may remember some more

azkhan (azkhan) 2012-07-09 10:29:00 +0500 #31

@saad bhaithanks for the memory flashback. Will try to address the minute details as wellRegards

azkhan (azkhan) 2012-07-09 11:37:51 +0500 #32

@hayzinThanks bro. How much air pressure you are using on savero's?

azkhan (azkhan) 2012-07-09 11:38:46 +0500 #33

'@taimoorkhan Upload the servo-assisted clutch picture.

taimoorkhan (taimoorkhan) 2012-07-10 04:04:13 +0500 #34

Thanks hayzin and saad bhai.

@azkhan let me find them

hayzin (hayzin) 2012-07-10 04:46:56 +0500 #35

Tyre pressure I'm using these days is 30.
In winters i take it down to 28

taimoorkhan (taimoorkhan) 2012-07-10 07:00:57 +0500 #36

Clutch servo

and the engine going in.

taimoorkhan (taimoorkhan) 2012-07-10 08:45:34 +0500 #37

Paint removal

ViKiNg (M.ali) 2012-07-10 10:04:36 +0500 #38

how much u paid for this machine?

fouadhafeez (fouadhafeez) 2012-07-10 11:06:37 +0500 #39

Coming along nicely. Best of luck for the future, as well.

taimoorkhan (taimoorkhan) 2012-07-11 06:24:22 +0500 #40

thanks @fouadhafeez bhai for the constant encouragement.