Required Mercedes Wheels

[devils_smile]

I found a set of Remotec 8-Hole wheels a few days back. Unfortunatly the rear's have hairline fractures in them. So disposing those off.

Thus I need <span class="bbcode-b">2</span> 15"x7jj or <span class="bbcode-b">2</span> 15"x6.5jj wheels. Offsets can be anywhere from 49-35.

I have found 1 15"x7jj ET35 but will need another to pair it with.

so if anyone has or knows where I can get these from, please let me know. Shops, workshops or any owner.

Dosnt matter if they are not Remotec's as long as they are genuine wheels made in germany/belguim.

[devils_smile]

bump.......

[devils_smile]

@arzaam.bhatti

While I still need 2 of these wheels with an offset of greater than 25, I will be putting the 2 wheels with the offset of 25 at the back for the mean time. I will sell these off when I get the required 2 wheels.

This is how an offset of 25 looks on my 190 at the back. Should I just stick with this look? The wheels here are a little too wide but the fender/tire alignment is the same when i stick the ET25's on my car.

Btw, i tested these on a w124 and they sit inside the fender but still pop out compared to the stock et49,44 and 41 offset wheels that come standard on a w124. So if anyone has these 8 hole wheels on their 124, I can trade them

ET25 on a w124 at front/back. Sits nicely in the rear.

[arzaam.bhatti]

i think 25 offset will pop out about a inch more than 45 offset which isn't too much. have you tried driving it with them? how does it feel. as you have been driving before if it feels just as before and not worse and it doesnt scrape inside the wheel well then all good, it'll look nice

[arzaam.bhatti]

i just found this offset and wheel width calculator, if you haven't tried already put the values in and see if its within tolerances, then all set

1010TIRES.COM - Wheel Offset Calculator