Restoration of Honda City 1998 Neo

[qwertypoiu]

I like it, keep posting

[bango]

For all parts - including stickers - the best place is Honda House.

The guy owns a couple of Hondas as well and will guide you in economizing your process without hurting the quality.

[kazmi_muzammil]

cruise control..:O,never heard of it..Please lemme know if u sort this out..
No it didn't came with ABS.But the power she has,I think it should be there..

Yea i was shocked too at the cruise control system, The car had a weird switch on dash-board and uncle told me it is of cruise control but the switch is disconnected from somewhere inside which i will try to find .... Will upload the pictures of the switch tonite... i havn't seen the cruise control system myself but dad and my uncle have seen it..there is a small motor and sensor also attached to the butterfly to maintain the rpm at the level you wish to once the C-C is on....

[kazmi_muzammil]

For all parts - including stickers - the best place is Honda House.

The guy owns a couple of Hondas as well and will guide you in economizing your process without hurting the quality.

Where is Honda House located bro??? Any number?

[kazmi_muzammil]

I like it, keep posting

Thank you ... Sure i will

[kazmi_muzammil]

@kazmi

nice to know that u r mostly working on her urself to sort out the issues.I own a 2002 model city.Amazing thing is that the only difference i found between ur car and mine is the exterior shape and the center console shape,rest of everything is the same.even the engine shape and design is same..
Gud luck with ur restoration.As for the NEO sticker,it will be quite hard because of 2 reasons.
1- this city model and the upgrade version (98-2002) parts are rare in 2nd hard market.
2 - and Among these the NEO's were sold even less.So it will be quite difficult to find an original NEO sticker..better is to try even 2nd hand market in Pakistan ..

Yes bro, the interior side doors are similar to the 2002 Shape , and the Engine is EFi in Neo. It only came with 200cc more power, rest design of the engine bay is similar to your model......

Thank you for your help and suggestion brother, i will visit bilal gunj and will try to find an old trunk there which has the NeO sticker.. Finger's crossed... one of my friend told me to visit the printing market near Laxmi chowk, they can develop custom sticker for the car but requiement is the original NEO written in a image file and the appropriate size....and they would charge alot too... :S

[bango]

Montgomery Road.

Ijaz - 0321-4218545

[imtishal]

If u find the sticker then how u r gone take it off??if it's an emblem then I highly doubt they would take it off from the trunk and give it to you,and if so,they will charge u alot.Bango gave a gud link try it and if u find it then do lemme know also i need to find some things for my car as well.

[kazmi_muzammil]

If u find the sticker then how u r gone take it off??if it's an emblem then I highly doubt they would take it off from the trunk and give it to you,and if so,they will charge u alot.Bango gave a gud link try it and if u find it then do lemme know also i need to find some things for my car as well.

Ok sure, ill let you know. I was looking to purchase the whole trunk in exchange with my car's trunk..i guess they would charge me a nominal fee for that...Anyways ill surely let you know...

@Bango: thanks mate for your help...

[bango]

Ok sure, ill let you know. I was looking to purchase the whole trunk in exchange with my car's trunk..i guess they would charge me a nominal fee for that...Anyways ill surely let you know...

@Bango: thanks mate for your help...

For trunk and second hand stuff, you can contact Kashif @ 0300-4156497. He has a shop in Bilal Ganj and deals in Honda parts mostly. You'll find a lot of cool JDM stuff with him. You may find a trunk as well.

If he doesn't have anything, he tries arranging it.

[kazmi_muzammil]

For trunk and second hand stuff, you can contact Kashif @ 0300-4156497. He has a shop in Bilal Ganj and deals in Honda parts mostly. You'll find a lot of cool JDM stuff with him. You may find a trunk as well.

If he doesn't have anything, he tries arranging it.

Thanx for the tip bro...

[kazmi_muzammil]

This is the story of an Amplifier and woofer i tried selling on Pakwheels when i had some financial crisis at large... But due to loads of comments negating the product, i kept it with myself... Today i thought of spending the night trying to fix it because that is the only time i am free as i get of work at 5.... Well, finally here it goes...

Woofer has been brought from UK for me by a very close friend so i know it isn't one percent fake and the Amp was purchased from here, so that is what i may doubt... hahaha

well here goes the picture section...

[shazo]

good ride n good effort of restoration.

[kazmi_muzammil]

My friend trying to figure out what the heck is wrong with the wiring.. :S
Insulation tape wasn't used either...

Insulation in Se*y red...

The whole pre was jammed up with transparent tape ... :-#.. See how shocked he is,

Ali: " DAMN!! How was this thing working !!!"

[kazmi_muzammil]

The Amplifier i once tried selling on Pak-wheels. Four channel

Wiring, wiring and wiring.....

Internal view....

Ali: Don't Peek!!! Haahaaa

Trying to hide the wires by passing them through the console

[hayzin]

GREAT effort man! And Mashallah a great ride to breathe live back in to! Good luck and keep posting your progress.

[kazmi_muzammil]

The green plug-in, i guess this is used for upgrading the EFI software?.. If i'm wrong correct me...

Positive

This amplifier has been used just twice... its almost new..

[kazmi_muzammil]

Opening the side of the carpet...

Carpet needs a hole...

dirty... :-#

The Sub

Finalizing the wiring...

[ajjubravo]

@Kazmi,
read Your PM!!

[kazmi_muzammil]

Testing if its operational

Glowing, nice...

Trunk is dirty, i will make a custom sub base at home that is a bit curvy and looks cool, i don't like this box base much