I'm posting this thread to ask a solution which is bothering me and my friend its a Santro 07 and the problem is that Fan some times Works like it should starts when needle gets to middle but when we floor the car drive fast Fan starts at 75% of the gauge we changed water in Radiator with coolant and Fan though is fine as i took the temp sensors clip out it works like Direct but one thing we cant understand its winter and Fan when we drive Rash turns on at 75%Santro's parts are not available in Peshawar and we tried to find the Temp sensor but no shop has it So any solution is help full plus we are thinking of taking the temp sensor out and cleaning it but we don't know how to take it out pic is attached bellow Thanks
bad news if its flaky.. you need that connected, its also the engine coolant sensor.
does it happen that sometimes it does not turn on at all?
Thanks for the Replies All and we found the solution it was way to easy there was a wire runing from a Coil from CNG kit to the sensor blue wire it was loose at the Coil end we tightend it and it works good now turns on at 50% of gauge nowbut now its facing some front suspension problems car is running with 13" Nexen 175\60\13 with alloy rims and i think we should get the work done and shift to stock size of tires Does any one know what is stock size of santro tires
I don't know about the stock size but lots of people are using 165/65/13 without any problem...
165/65 r13 is best size for santro
stock 155/70 R13
but 165/65 R13 is best for santro.
Mine sometime does not even switched ON, then I have to switched ON the AC, which starts the fan Directly and the temperature needle become normal, It happens only on signals, then i have to keep an eye on the needle when in signals.
sir if ur ride has FF CNg then check that blue wire which goes to switch
and it started Again :@