Self Tunning - Khyber G-10 (Plugs, valve clearance, spark gap etc)

Tags: #<Tag:0x00000009cddf80>

car.need.care (car.need.care) 2018-03-08 22:10:25 +0500 #4613

What is the purpose of built in resistor spark plugs, and can I use them in Khyber?

saboor73 (Saaboor A saad) 2018-03-08 22:13:36 +0500 #4614

Khyber oem plugs are resistor type reason for having a resistor in them is to eliminate electric flux etc this helps electric component in cars to work without distortions

khawarkhan29 (Khawar Baloch) 2018-03-09 01:33:53 +0500 #4616

Can you name the exact company and model number of oem khyber plugs?

hassantahir2 (Hassan Tahir) 2018-03-09 02:07:35 +0500 #4617

^Stock plugs are
Denso W16ex-u OR NGK BP6ES.

car.need.care (car.need.care) 2018-03-09 02:44:53 +0500 #4618

As far as I know both of them are non resistor type.

anon71378895 2018-03-09 15:33:28 +0500 #4619

This post was flagged by the community and is temporarily hidden.

hassantahir2 (Hassan Tahir) 2018-03-09 16:42:03 +0500 #4620

The EY and ES in end of the plugs name tell about the electrode type now ES being old have been replaced by EY series so nothing to worry about that.
That's only one heat range difference in your case so i guess so that's fine doesn't matter that much in our case due to weather conditions.
Those above mentioned plugs are recommended in owner's manual.

anon71378895 2018-03-09 16:53:43 +0500 #4621

This post was flagged by the community and is temporarily hidden.

Deadly_Flame (Aksum Qurban) 2018-03-12 21:27:48 +0500 #4622

Aoa brothers, I am looking to change the disc rotors of my khyber, they've been tooled multiple times now. The brakes get hot fairly quickly and the stopping power reduces. I think it's time to get new rotors. I would like to know what brands are available in the market? and if anyone has had any experience with new locally available rotors in the market.

Regard,

brownrose78 (brownrose78) 2018-03-12 21:40:04 +0500 #4623

Install 4 tip Bosch spark plugs with Ultima cables will provide steady current and also improves mielage.
Disk Rotor of Ultima, NK, MK are available

Deadly_Flame (Aksum Qurban) 2018-03-12 22:14:25 +0500 #4624

Thnx man, can you please let me know which ones are the best among these?

hassantahir2 (Hassan Tahir) 2018-03-12 22:24:45 +0500 #4625

How's your G-15 swapped Khyber doing ??
A shop was selling some Japanese front rotors for Khyber for 2800/-RS and he was claiming these are best available in market for Khyber. I can't exactly remember the name but i guess those were from NBK or something like that.

sbdanish911 (SB Danish) 2018-03-14 11:47:55 +0500 #4626

Salam, i have a querry
I am unable to trace wiring for “alternator idle up solenoid”, i found two wires but they put out 12v as soon as i turn on engine, my question is, “are those wires idle up solenoid wires?, also they show no difference in voltage when i turn on headlights.

Deadly_Flame (Aksum Qurban) 2018-03-14 12:02:20 +0500 #4627

It's going good Alhamdu'lillah. There is some electrical issue which completely drains the battery, have to get that checked now, was busy for past few months so couldn't get that checked. The windshield also needs readjustment. And a few other small things. However, engine wise it's really good, no issues there.

I'll visit waseem autos and see what they've got. Everything has been changed with regards to brakes, except the rotors. Master cylinder, the T, brake pads, all without any good results, Rotors are stock and have been tooled multiple times, I am now hoping that my brakes will improve drastically with new rotors. fingers crossed

sbdanish911 (SB Danish) 2018-03-14 12:15:16 +0500 #4628

Ok now the situation is changed, i unwrappd sngine wiring harness and found a black wire for ground, now i have three wires, black (ground), brown white (idle up solenoid) and a red white cable which i dont know is for what purpose.

hassantahir2 (Hassan Tahir) 2018-03-14 12:38:14 +0500 #4629

Try to get Frixa brake pads with new rotors @speedster_101 has them in his Khyber and he is satisfied with them MK and Asuki pads are just soso.
I am also using the same Frixa pads in my Cultus but they are abit hard to find for Khyber...

khawarkhan29 (Khawar Baloch) 2018-03-14 13:05:30 +0500 #4630

Where to get these frixa brake pads? I tried to find them in rawalpindi from sadar, gawalmandi, and sultan ka khoo but shopkeepers acted as if they never heard of this name before. @speedster_101
One problem with brakes is when i apply the brakes it feels as if the pads are doing grab leave grab leave. It's not smooth.

hassantahir2 (Hassan Tahir) 2018-03-14 13:07:59 +0500 #4631

@speedster_101
Can tell you about that.. He got them for his Khyber from ISB / RWP with help of his mechanic.

anon71378895 2018-03-14 15:57:31 +0500 #4632

This post was flagged by the community and is temporarily hidden.

khawarkhan29 (Khawar Baloch) 2018-03-14 16:06:39 +0500 #4633

Pk autos was the one which seemed completely unaware of this brand of brake pads. Haven't checked kohinoor but waseem autos and a few others didn't have that. I'll check kohinor in a few days.
I managed to find front right side parking light cover made by koito but they didn't have the left side one, i tried to find left side original cover from everywhere but no one had it. Local ones give black tint in them and the genuine one is completely transparent and white. I think i will replace right one with the local cover too bcz one parking light dark and the other light sparkling white is looking unpleasant to the eyes. Extremely difficult to find original parts of khyber.