Self Tunning - Khyber G-10 (Plugs, valve clearance, spark gap etc)

[cracked]

USB...
yar my kit dont have tht bolt..tht comes in landi renzo kit,,i have i guess orysa or something....it dont have tht bolt....i think ill need to get it checked with taking it out..

[smijaz]

Thanx Bhai. I will visit him in the morning. By the way Ijaz bhai where is your job/ business. I will visit you.

I am an IT professional in a federal government organization near Shaikh Zayed Hospital. We can coordinate and have a meeting at a convenient place.

[usb144]

I am an IT professional in a federal government organization near Shaikh Zayed Hospital. We can coordinate and have a meeting at a convenient place.

Ijaz Bhai PM me your cell number

[usb144]

Today i have visited Ahmad CNG Link Whadat Road, Lahore.

They are quite professional persons. I met with Mr Babar and he treated me very well. They serviced the whole Blower inside the Dash Board, Compressor Condenser and finally put R-12 in AC system. Compressor was old and called turbo Compressor. So all system was of R-12. They took almost 4 hours and then relieved me from there.

Charges were as under,

Gas R-12 Rs 2000/-
Gas Filter Replaced Rs 450/-
Over all service Charges Rs 500/-
Total 2950/-

and i am satisfied.

[usb144]

[QUOTE=cracked;2690896]USB...
yar my kit dont have tht bolt..tht comes in landi renzo kit,,i have i guess orysa or something....it dont have tht bolt....i think ill need to get it checked with taking it out..[/QUOT]

Yes bro that bolt comes with landi Ranzo. In my opinion you don't open the kit yourself. get it checked from any valid mechanic.

[fas133]

i have this electrical problem..if u cud help me here again
prob is with central locking..
locks dotnt LOCK wen i use remote or car lock of driver side...so i have to do seperately all locks..but all lock open up normally..
mean lock band nae hoty na remote sy n na he driver side sy but open ho jaty hain both from remote n driver side...ive checked wiring of driver side lock,its all good..any ideas???

Security system module and central locking module are two separate modules and they are interconnected and there are two 12v relays in the central locking module one for opening and other for closing the locks.Check them.If further assistance is required just let me know.

[Xulfiqar]

Today i have visited Ahmad CNG Link Whadat Road, Lahore.

They are quite professional persons. I met with Mr Babar and he treated me very well. They serviced the whole Blower inside the Dash Board, Compressor Condenser and finally put R-12 in AC system. Compressor was old and called turbo Compressor. So all system was of R-12. They took almost 4 hours and then relieved me from there.

Charges were as under,

Gas R-12 Rs 2000/-
Gas Filter Replaced Rs 450/-
Over all service Charges Rs 500/-
Total 2950/-

and i am satisfied.

Rather cheap for a receiver/drier - is this the black one or the OEM thick silver one - I had a rather stupid experience with one of these black unbranded chinese driers - the dessicant bag inside blew up choking the liquid line and TX valve, That was enough gaaliyan right there, as I had just installed it complete 4 days ago.

[Xulfiqar]

@ Xulfiqar

Got few queries for your kind perusal and response

1. When the discharge pipe in my car burst all the gas with oil was out of the system i went back to the shop and he fixed it up but did not put oil in the compressor. I insisted but he told me the branded refrigerant has oil in it and no need to put extra as it will damage the drier. What do you say about this issue?

2. Is there any way to physical differentiate r12 from others

3. Any other tip or info you wish to share regarding condenser change is welcome

If your system burst a pipe - you definitely need to replenish the oil level in it, because a large sudden leak will push out all the oil too, a slow leak leaves it inside.

The bit about refrigerant having oil premixed with it is mostly a lie, you need to put in oil separately (choose a Suniso Brand oil) - most A/C shops do not carry the real thing because a 4 litre bottle of branded Suniso or Sanden oil costs about Rs 10,000/- You should also investigate why the discharge line burst - and rectify that before starting off with new work.

the best eyeball way to see R12 is to measure the bottle weight and pressure according to the ambient temperature.

[smijaz]

Rather cheap for a receiver/drier - is this the black one or the OEM thick silver one - I had a rather stupid experience with one of these black unbranded chinese driers - the dessicant bag inside blew up choking the liquid line and TX valve, That was enough gaaliyan right there, as I had just installed it complete 4 days ago.

it must be the black one coz oem one cost more than 1200. I knew You have always something rare to suggest but now i know why, because, only the rarest thing happens to you. desiccant bag blew up :o

I hope no such thing happens in this case coz it was me who referred him there.

[usb144]

Rather cheap for a receiver/drier - is this the black one or the OEM thick silver one - I had a rather stupid experience with one of these black unbranded chinese driers - the dessicant bag inside blew up choking the liquid line and TX valve, That was enough gaaliyan right there, as I had just installed it complete 4 days ago.

This is not OEM Silver one. From Top it is Black. He told me that it is much better. It will easily serve its purpose for one season. In next season it will be replaced by new one. Silver one is also replaced after one season usually. Both work same and equally. He is responsible for any problem.

[usb144]

it must be the black one coz oem one cost more than 1200. I knew You have always something rare to suggest but now i know why, because, only the rarest thing happens to you. desiccant bag blew up :o

I hope no such thing happens in this case coz it was me who referred him there.

Hahaha:D ijaz bhai I specially pay your salam to him and told him that I am referred by you. He was very glad to know that.

[usb144]

These are pics of R-12 Gas Box

[smijaz]

Hahaha:D ijaz bhai I specially pay your salam to him and told him that I am referred by you. He was very glad to know that.

So howz the ac performance now, any noticeable improvement with r12 ?

[cracked]

Security system module and central locking module are two separate modules and they are interconnected and there are two 12v relays in the central locking module one for opening and other for closing the locks.Check them.If further assistance is required just let me know.

yup,security system is working but the cantral locking system is just working wen i open up car with remote,car dont locks with remote...

can u show picture of the V12 relay???i have located the central locking n security system module...v12 relays need to b found...i dont knw how they look like

[cracked]

fas
brother i checked all wires of central locking...the central locking module wired r goin to some white color thing,
is tht the v12 relay?
there r two of tht white thingies with wires coing from one central locking module n other from lock module..
ive chkd all fuses and wires ,all r good...wat to do next?

[usb144]

So howz the ac performance now, any noticeable improvement with r12 ?

Yes Quite chilled AC and have to stop after some intervals.

Ijaz Bhai Today i have traveled out of City, Faisalabad and just came back and updating my experience.

Ac performance was excellent. But i felt a noticeable decrease in pic without AC. My khyber was running on CNG and consumption was also good. But the only issue is with its PIC. when I put 3rd gear i felt noticeable vibration in my foot from clutch Lever/Paddel. But on 4th gear vibration vanished. Before this I have traveled to Gujrat 1 month before but the Car was running at 120-135KM/h speed and car felt no any load. Like gari barai aram sai is speed ko achieve kar rai thee. But today it hardly touched 120km/h speed and with heavy heart. At some moment I stop the CAR on Motorway and tightened the plug wires. After that speed was Ok and raised to 130. But after 30-45 minutes speed again decreased to 110-115. There is no oil in CNG Kit. All this activity was without AC.

What is your opinion inthis regard.

In my opinion Plug wires and Clutch wire ka problem hai. Plugs are NGK and changed 1 month before. Wires changed 4 month before and put ultima CNG-wires orange colour with DENSO Coil.

[smijaz]

Yes Quite chilled AC and have to stop after some intervals.

Ijaz Bhai Today i have traveled out of City, Faisalabad and just came back and updating my experience.

Ac performance was excellent. But i felt a noticeable decrease in pic without AC. My khyber was running on CNG and consumption was also good. But the only issue is with its PIC. when I put 3rd gear i felt noticeable vibration in my foot from clutch Lever/Paddel. But on 4th gear vibration vanished. Before this I have traveled to Gujrat 1 month before but the Car was running at 120-135KM/h speed and car felt no any load. Like gari barai aram sai is speed ko achieve kar rai thee. But today it hardly touched 120km/h speed and with heavy heart. At some moment I stop the CAR on Motorway and tightened the plug wires. After that speed was Ok and raised to 130. But after 30-45 minutes speed again decreased to 110-115. There is no oil in CNG Kit. All this activity was without AC.

What is your opinion inthis regard.

In my opinion Plug wires and Clutch wire ka problem hai. Plugs are NGK and changed 1 month before. Wires changed 4 month before and put ultima CNG-wires orange colour with DENSO Coil.

My opinion would be to check air filter condition first.

[fas133]

fas
brother i checked all wires of central locking...the central locking module wired r goin to some white color thing,
is tht the v12 relay?
there r two of tht white thingies with wires coing from one central locking module n other from lock module..
ive chkd all fuses and wires ,all r good...wat to do next?

Open the central locking module and you would find two relays (as shown above but color may be different).Change both of them as they are not much expensive.(Rs.15 to 20 each).These are used in UPS kits so you could get it from any UPS repair shop easily.

[cracked]

fas...
bro i found these two relays but they r non-removable...ithey r like welded thingy...
does it means ive got to chande tht whole module?

[fas133]

fas...
bro i found these two relays but they r non-removable...ithey r like welded thingy...
does it means ive got to chande tht whole module?

Relays are soldered to the PCB.You just need a soldering iron to de-sold it from the PCB.