The Coil is ND Nippondenso (black cylinderical and with Blue plastic top)
Yes i just checked the coil resistances, if i did it right.
(One i checked between + and center terminal and otehr between + and - )
it came out to be 13.6kOhm and 2.0 Ohm.
The service limit of it is 1.1 to 1.4 Ohm and 11.4 to 15.6kOhm
the 2 Ohm value is out of range here.
You will know better that it will cause such leakage in wires or not?
About the wires resistance, i did not checked all but when installing i checked for one cable's resistance which was 2.6kOhm. I will check for all today.
The spark plugs were installed by the mechanic, i dont know its gap. I will also check for it if i got much time today.