SER_GTR's.....Project 86........!

[aes090]

Shukkkaaarrrrr

[SER_GTR]

If You Can't Find The Video's In B/w My Boring Discussion ...!

Here's It

Videos Of Test RUN

Test Run No 1
http://www.youtube.com/watch?v=euFkpqQgbe8&feature=channel_page

Test Run No 2

http://www.youtube.com/watch?v=CEqdCH9hyp4&feature=channel_page

[SER_GTR]

08- JAN 2009

Have To Place Things Back .......So Here Are Some Stuff...!!

Also Left Wiring Points For Side Gauges So Just Plug And Play Thing To Do Later.....No Opening Of Cluster Again...!!

Cluster Out For VSS Work And Gauges Points...!!

ECU On Floor..Tracing Wires For VSS..!!

Cluster Lying There.....A View Of Rear....No Seats ...Dang...So Much Space

Installing Back Cluster .....!!! A Tough Job Specially Connected Speedo-Wire

Its All Done...Notice The Wire Hanging Right Side...Its Left Out Gauge's Points...!!

Its Getting Better Now...ECU Also Putted Back After Getting STA Wire Connected Properly...!!

A Rear View....My Surge Tank Still There Lying...!!

As Usual...Side MEAN Look 8-|

Tataaan.....!! No CEL...Idling Perfect After A Drive...!! It Means VSS Sorted.....!!

Thats For Today...Still More Work To Do........Installation Of Lots Of Work Is Left....!!

Regards

[AkbarGr8]

Awsome job farrukh (Y)..keep it up.. now there just one thing left to do with the car...make a WILD guess LOL (6)

[fawi]

MASHALLAH... gud going keep it up.. congrats on its first run

[freddie4fingers]

@SER_GTR
Question for u. How well are the brakes working with the new motor installed?

[SER_GTR]

@fawi...well bro 1st run was given year back.....but after sorting issue....yea its the 1st test run.....!!

@akoo...keep your CNG theory away from it.......Damn...I M Not Gonna Do That.....Mind It (H)

@freddie4fingers.....front disc are upgraded with AE101's 22v Ventilated Disc.......!! Though...After The Actual Run I Sort It...Booster Won't Look Upto Mark.....Also I Hav'nt Connected Both Of Vacuum Lines Together....Running It On Single Vacuum Line...But After These Runs.......I Remember That Brakes Are To Needed To Be Worked More....Though Front Is Alreay Upgraded With AE101's Heavy Discs..But Rear Is Not......!!

Regards

[levin]

you need a gearknob, it says 1-2-3-4-R only

[kashif_awan]

@SER
really happy to know that your problems has been sorted out.
Man i must say its a great engine when its running good.
And worst when prblematic. You using hi-octane? Ive tested it on regular too. But on hioctane its on fire. Really love the power.
By the way what that stupid STA wire signals to ecu. Is it 12v after starting or some swiching. I think its signale swiches when starter swings and when the motor starts there are 12volts on the STA. Am i correct?

[SER_GTR]

Damn.......With Knob I Need A Shifter Also I Think.........!!
Its Quiet Long In Shifts As Well As In Length......lol...!!

I Need So Many Things Like That To Be Changed...All Comes In Future.....!!

I Am Glad I Over Come That Serious Drivability Issue's...That Was The Main Concern For Me For Time Being.....These Things Comes After That......Right Now I Have Almost a BOX Full Of Things To Be Placed INN Already.....!!!

My Another Purchase....Thanks To Wasay....(y)
NGK Iridium's

My Main Concern Is To MATCH The No Exactly With Factory Spec No...Its HARDDDD To Find These Matching Exactly Same As Factory And NGK Recommends For 20v..!
Thanks WASAY...He Get Over These After So Much Searching...!!

So Much Still To Add So....!! Infact YET So Many BIG DIY's Are Still Left To Be Done...!!

Regards

[SER_GTR]

@kashif!

Yaar Its Feeds ECU Voltages While You Are Cranking Engine For Start... During Cranking Battery Have 6-7V Left As Cranking Makes It Down From 12 To 6-7V....So At That Time...ECU Needs 6-7V To Know That Engine Is Being Started Now....!! That Signals Are Not Feeded Earlier So ECU Was Being Dumped....Did'nt Know What To Do :P... Also 02 Is Un Matched For 20v..Or Either That Foul Wired It InCorrectly......Who Knows...!!
STA Signals Only Exist While Ur Cranking..Once Engine Start And You Left Key...It Gets To 0 Volt...On IGN..Its Also 0 Volts....Just Signal While You Are Cranking

Well Car Is Really Responsive And I Don't Need To Mention How Good The 20v BT Is......!! On Its Own Chassy.....Its Known For It....So Mine Is So Much Lighter And Shorter Thing In Which Its Placed.....!! I Still Need To Tune It....Thats Just A Rough Run Without Anything Much Checked Like Timings And Other Adjustments....!!

ITB's Are Still Not Uncovered Also......(H)

B/w You Post Pics Of Your Car Also Along With SWAP Details....

[wasay_ahmed]

No probs bro
I though you must have installed them

[SER_GTR]

Yea Sure...Wasay
All Come.....You Just Don't Worry (H)
Thing Is That...I Am Again Lacking Time And No Upcoming Holidays

[Starlet_GT]

Farrukh ... how much spend till yet ... ?

[N2O]

atlast no2 figures the problem out i told you that to check the wiring of that sensor but u didnt listen to me,but u also didnt had time to do it,i remember my time when i codnt solve out my problems either and i was soo pissed i cant tell,but after alot of research and work when u solve it on ur own the happiness and pleasure u get from the drive is un-measurable
happy for u no2

[SER_GTR]

@ibrahim bhai.....hav'nt totalled it yet...still so much left to do...!!

@no2.......8-| yea...i remember that time when ur car used to burn 500rs petrol within ur neighborhood :p...running rich like .......and also i told u to check MAP but u didn't and in LAST Its MAP Wiring 8-|....!!

In Mine...Its 02 sensor......MAP Is All Ok....Its 02 Not Matching Up.....Along With STA Wire Not Connected......!! Not My Fault.....Body Wiring Wala :@....Good Thing Is That Its Sorted Out And I Can Fell It Now....!! Pure DIY Ride Have Its Own Joy Man ....!!

[palaykhan]

whos no1 ^o) and whos no2 ^o)

[levin]

sergtr: look ard for 6 speed transmission, yr gear ratios are too long --wasting too much time dragging gear till it reaches next shift torque

[SER_GTR]

@Levin ...Well....C56 Works Ok For It.........!!
C56 Are Much Stronger Built Than Those C160 Ones.....!! And Cost Almost Half And More Than Half Of Engine Price....!!

For Me They Just Work Fine......!! I Am Trying To Get Hands On Some AE101-AE111 Shifter.....Its Quiet Long As I Am Felling...!! Still Works Ok.....!!
After Shifter.........Shifts Goes More Smooth And Quicker....!!
I Can't See Where You See I Am Dragging Gears.....Hav'nt Tried 3rd Of It After Work Is Done.......1st And 2nd Are Quick Responsive Enough......!! Long Ratios Trannies Are Of C52 4AFE.....!!C56 Don't Have Long Gear Ratios...!!

@palay....You Decide YourSelf....... I Call Him No2 A.K.A N20

[levin]

i think you havent experienced the short ratios on 20v yet. usual corolla gearbox is for economydrive the so called c56.

phone libra and ask him abt TRD ratios on 20v:)