Share the desi totkas done on cars in Pakistan

[Fahad.Ayub]

Saw people pouring water on hot brakes coming down-hill from Murree old route to cool them down.

people are getting dumber day by day

[Xulfiqar]

Pardon the necro-ing but doesn't this process of heating and dipping in water makes things more brittle instead of softer?

not with copper

[Xulfiqar]

I saw an old Bedford truck wala rubbing potatoes on the wind screen, no wipers it works perfectly as a rain repellent apparently.

bang head here

loaded heavy truck and no wipers ..... That sounds very safe.

[Xulfiqar]

Saw people pouring water on hot brakes coming down-hill from Murree old route to cool them down.

you should have stoppd and gave them an applause for climbing down the IQ ladder.

[wasim625]

i am using delo gold in my car and its done about 1.5k till now and Alhumdullilah now issues or problems faced so far
infact my car is returning better fuel economy [emoji14]

Well errmm what i have learnt from @xulfiqar bhai's comments diesel oil must not be used in gasoline engines.
Since diesel oil have high detergent contents and other scrubbing additives that will scrub the "delicate" petrol engine way too hard rendering it causing problems such as oil reduction and in the long run a complete mess will be waiting for you.
@xulfiqar
Bhai correct me if i am wrong.

[Xulfiqar]

Well errmm what i have learnt from @Xulfiqar bhai's comments diesel oil must not be used in gasoline engines.
Since diesel oil have high detergent contents and other scrubbing additives that will scrub the "delicate" petrol engine way too hard rendering it causing problems such as oil reduction and in the long run a complete mess will be waiting for you.
@Xulfiqar
Bhai correct me if i am wrong.

umm

you picked up some wrong information or incomplete information somewhere. diesel oils are very tough and can be perfectly used in petrol engines provided it meets the correct API rating and also viscosity.

[wasim625]

umm

you picked up some wrong information or incomplete information somewhere. diesel oils are very tough and can be perfectly used in petrol engines provided it meets the correct API rating and also viscosity.

Lol for the first time in 23 years of my life this happened.
I'll be more careful.

Thankyou for correcting me bhai
@fahad.ayub please resort to this post.

[Fahad.Ayub]

Lol for the first time in 23 years of my life this happened.
I'll be more careful.

Thankyou for correcting me bhai
@Fahad.Ayub please resort to this post.

he actually discussed this topic a few times in various threads
delo gold is good to go in my case

[huraiz]

Saw people pouring water on hot brakes coming down-hill from Murree old route to cool them down.

You think this is bad,a friend of mine once tried to cure the squeaky front brakes by rubbing engine oil on discs.Luckily someone saw him doing it and stopped him from driving the car.

Sent from my candlestick phone

[Xulfiqar]

You think this is bad,a friend of mine once tried to cure the squeaky front brakes by rubbing engine oil on discs.Luckily someone saw him doing it and stopped him from driving the car.

Sent from my candlestick phone

your freind smokes crack perhaps?

[huraiz]

your freind smokes crack perhaps?

Haha God help us all if he actually starts doing drugs.He is bad enough as it is.

Sent from my candlestick phone

[MGK]

You think this is bad,a friend of mine once tried to cure the squeaky front brakes by rubbing engine oil on discs.Luckily someone saw him doing it and stopped him from driving the car.

Sent from my candlestick phone

Must be a Peugeot owner.

[MGK]

Totka of the year

[Xulfiqar]

I have seen worse crap done on car suspensions here in USA than anywhere else in the world, There is a fad called donk cars here where the rim sizes for the cars start at 22 inches and go upto 30 inches.

shoving a 30 inch rim in any sedan is not possible without major cut weld and the people who choose the donk culture get the cheapest and shadiest POS welding job done on their car, saddle U clamps to hold springs up, adding a length of bar stock to the spindle swan neck to elongate it (major safety issue)

[Driver41]

Doing tappet adjustment by using universal gauge A thin metal sheet

[Driver41]

Using relay everywhere

[wasim625]

Looolx

[wasim625]

Using relay everywhere

Apart from the fact that relays shouldn't be used every where.
They don't atleast harm a circuit do they?

[Xulfiqar]

Apart from the fact that relays shouldn't be used every where.
They don't atleast harm a circuit do they?

relays without quenching diode can pit the control unit contact plate.

[wasim625]

relays without quenching diode can pit the control unit contact plate.

bhai, thora asaan alfaaz me kindly...