Dear Pakwheelees,
I have installed 6 pannels of 165 watts. Therse pannels are connected with 60 Ampere PWM charge controller. I am getting total only 9-12 amperes output on pannels whereas each pannel is providing 4-7 amperes individually while testing through connecting +/- terminals together.
There should be atleast 24- 40 amperes output but why it is just 9-12? If remove 3 pannels than output emains between 7-9 amperes means there is very less difference in output after removing 50% pannels.
Why 6 pannels connected parallel with pwm charge controller is proving small output?
