Pioneer)

Technical Forums

In-Car Entertainment (ICE)

xenerking (xenerking) 2022-02-14 00:35:01 +0500 #7

any valve amplifier option for car audio?

devils_smile (Mustafa) 2022-02-14 10:40:49 +0500 #8

I don't believe so. Havn't come across anything like that on any car audio forums. I don't think its very practical

xenerking (xenerking) 2022-02-14 15:46:43 +0500 #9

its a pity

devils_smile (Mustafa) 2022-02-15 01:43:42 +0500 #10

Some Pictures of the amazingly brilliant subwoofer from the mad people at JL Audio along with the all around double baffle mdf sealed box lined with Trent Sound deadening sheets and STEG accustic padding

devils_smile (Mustafa) 2022-02-22 16:49:34 +0500 #11

Amplification: Hertz HCP4D

https://hertz-audio.com/product/car-audio-amplifier-hcp4d/

70 watts RMS x 4 at 4 ohms
130 watts RMS x 4 at 2 ohms
260 watts RMS x 2 bridged at 4 ohms (4-ohm stable in bridged mode)
CEA-2006 compliant ratings
Class-D amplifier technology
frequency response: 10-60,000 Hz
variable high- and low-pass filters (50-3200 Hz, 12 dB/octave) on front and rear channels
variable bass boost (0-12 dB at 50 Hz) on rear channels
mono buttons allow 4 outputs from 2 inputs
preamp and speaker-level inputs
Automatic Remote Turn-on with speaker-level inputs
preamp outputs
fuse rating: 20A x 2

devils_smile (Mustafa) 2022-03-01 22:37:49 +0500 #12

GroundZero GZCC 3.14X-TP

Introducing the competition grade RCA's from Ground Zero. Gold plated slotted metal connectors with pressure clamps, triple shielded twisted pair OFC construction, snakeskin braided nylon jacket

https://www.ground-zero-audio.com/en/produkt/gzcc-3-14x-tp/

malikgli2018 (Malik) 2022-03-08 10:59:13 +0500 #13

Can you please quote the prices of all the eqpt?

devils_smile (Mustafa) 2022-03-08 23:33:30 +0500 #14

Sure, check you pm

devils_smile (Mustafa) 2022-04-27 13:09:50 +0500 #15

Got the 3M Fast Rings. These are intended to isolate the midbass from getting lost within the door. The central ring (pic 1) goes right behind the midbass driver and the outer ring (pic 3) goes around it ensuring the music travels into the cabin and the cabin only. An additional outer ring was also bought for each speaker which was installed on the inside of the door (pic 2) ensuring the coil is protected from water and reducing unwanted resonance inside the door frame

devils_smile (Mustafa) 2022-04-27 19:59:26 +0500 #16

Ran the new kicker wires. Since the cs1721 has Allen screws to tighten the speaker wires, rather than pushing the wires straight into the sockets, I put on some ferrules and covered the respective wires with their color coded heat shrinks

devils_smile (Mustafa) 2022-04-27 20:22:25 +0500 #17

Sub Stage Update: Helix P12

devils_smile (Mustafa) 2022-04-29 01:29:45 +0500 #19

The main power/gnd wires will be the 4 awg Stinger Pro series tinned OFC cables. These will get covered in braided sleeving along with the correct sized ferrules and heatshrinks

https://stingersolutions.com/collections/power-wire/products/4ga-pro-power-wire-black-100-roll

TRUE-SPEC tinned Oxygen-free Copper
Translucent colors
Hyper-twist construction
Ultra-flexible matte jacket
4GA- 1666 Strands

devils_smile (Mustafa) 2022-04-29 16:14:59 +0500 #20

Post Withdrawn

devils_smile (Mustafa) 2022-05-02 00:16:32 +0500 #21

post withdrawn

devils_smile (Mustafa) 2022-05-03 01:17:09 +0500 #22

Post Withdrawn

devils_smile (Mustafa) 2022-07-01 03:12:31 +0500 #23

post withdrawn

devils_smile (Mustafa) 2022-07-01 03:21:14 +0500 #24

post withdrawn

devils_smile (Mustafa) 2022-07-07 03:56:58 +0500 #25

Post withdrawn

yawar538 (yawar538) 2022-07-10 00:00:26 +0500 #26

Looks superb and clean uptil now. Waiting for more updates

devils_smile (Mustafa) 2022-07-11 16:59:34 +0500 #27

Post withdrawn