Suzuki Alto Owners/fan club

[salmankhan_627]

Ya all kabuli spares will be done. Using original swift mounts. Very expert mechanic can do such job. IA it ll be a fantastic project.

budget and where are you getting it done from? anxiously waiting for updates.

[dr3vil]

to KPK he kyu na shift hojaen

well today I asked prices
32k for f6a efi
and turbo version there was one but shop keeper nahi tha
bte 12 valve 660 carbi is for 25k

Sent from my GT-I9300 using Tapatalk

[dr3vil]

and changed carb jet today just for experience as I will come to isb so no cng petrol ki tabaahi
jet which is in genuine is my bad 92.5
but it is still very big
I searched market and we saw a p5 no jet compared to stock one and it was clearly smaller
after installing I cheked and revved engien a little
on stock jet petrol goes into camber like a pani ki leaked tooti lol
and new one all I saw was spray and my rough guess in local I dorve it
needle barely moved little bit I rush and local traffic
but after jet change on petrol car is smooth no jerks and on stock jet with mods I done on acceleration my alto would just get out of contoll
now it feels contoled no brutal acceleration

Sent from my GT-I9300 using Tapatalk

[addeology]

32k is same price for k6A in rwp aswell. If anyone want k6A, do tell me. My al5o had this one swaping wd m13a. Mine k6a was with OD.

[addeology]

Well i ll share the expenses details as it ll be finished. Today i was searching AT lever of swift but cudnt get yet. Lot of manual stuff here.

[dr3vil]

my alto on petrol without ac on local with mix driving some times heavy foot around 50kms
is it good?
and compared yeasterday fuel economy today it went better then before
but i will share pic of fuel gauge and i remember where it was so one can get idea

[dr3vil]

50kms in local and this is consumed
remeber rush and hard acceleration are must in city of peshawar

Sent from my GT-I9300 using Tapatalk

[dr3vil]

hello
lagta hau sab na altos bech di hain lol
so calculated idle time after jet wqs changed
before changing jet 2:26 was time it took to turn off when petrol is switched off from cng switch
now after jet change 3:11 is the new time

Sent from my GT-I9300 using Tapatalk

[Tabish1]

ALTO needle not accurate at many times

[salmankhan_627]

32k is same price for k6A in rwp aswell. If anyone want k6A, do tell me. My al5o had this one swaping wd m13a. Mine k6a was with OD.

is that an automatic? how much driven?
I'll appreciate your prompt response.

[salmankhan_627]

Well i ll share the expenses details as it ll be finished. Today i was searching AT lever of swift but cudnt get yet. Lot of manual stuff here.

I'll be waiting.
where are you getting it swapped from btw?
I am going for the K6aT. Comes in the Kei and is 61hp

[salmankhan_627]

ALTO needle not accurate at many times

exactly. it drops like crazy when it comes to the end of that fuel pump figure

[addeology]

K6A is AT. I drove almost 6000km. Installed in march 14. It is OD function.

[addeology]

My M13A swap project is running in rwp. So far spent 75k. 65k on engine. 7k on axcels and rest on minor things.

[dr3vil]

My M13A swap project is running in rwp. So far spent 75k. 65k on engine. 7k on axcels and rest on minor things.

pics pls

Sent from my GT-I9300 using Tapatalk

[usmansaeed2]

Guys it seems tat pak suzuki is launching new alto 800cc model in 2015....is it true?

Sent from my GT-I9100 using PW Forums mobile app

[dr3vil]

Guys it seems tat pak suzuki is launching new alto 800cc model in 2015....is it true?

Sent from my GT-I9100 using PW Forums mobile app

nop

Sent from my GT-I9300 using Tapatalk

[addeology]

Engine bay cleaned b4 installing engine.

[salmankhan_627]

My M13A swap project is running in rwp. So far spent 75k. 65k on engine. 7k on axcels and rest on minor things.

Rwp kis jaga se?

[addeology]

Chaklala scheme 3.