Suzuki Cultus Fan Club (2000-2016)

[abid110]

cant say exactly but yes, the length tells its of Liana.

[RehanBhatti]

If its from Liana then I will give it a try in next season with cultus OEM denso compressor( used one in best possible condition) and a puller fan which i have installed already.
Can you recommend any other full size condenser for cultus which can be installed easily on existing mounting holes.

[abid110]

can we really install another fan to keep things ok during AC operation? and do they really help?

[hassantahir2]

Can you recommend any other full size condenser for cultus which can be installed easily on existing mounting holes.

It would only be on hit and trial basis. As i did while choosing condenser for my Khyber.
Take the measurements of front of your car and go to some guy who has alot of condensers with him measure them and choose the one which can fit. But you will have to fabricate mounts for that as i did to fit that condenser in Khyber.
It would be really hard to get a Bolt-on replacement.

[hassantahir2]

can we really install another fan to keep things ok during AC operation? and do they really help?

Yup you can and that does helps alot while moving below 50~60kmph. But if stock Fan's are good and they pull enough air to cool the condenser then extra fan wouldn't help.

[RehanBhatti]

Thats a great idea. My AC tech buddy is sorting out scrap condensers nowadays for sale to Kabaria.
I will find one of them for measurements purpose.

[sayedgulhassan]

Hahaha.... Yr Mene bhi apne ac ka kuch krna ha ap ne help krne hai garmiyon ma koi project krna ha ac kay leya​

[RehanBhatti]

Lets hunt for bigger size multiflow condenser for cultus togather.

[sayedgulhassan]

@RehanBhatti bhai im also thinking to change condenser with new one that dryer bottle and i need suggestions regarding my compressor plus its fan.
Should i use existing sanden by getting all of its seal changed its cooling is good but maybe its clutch is causing to turn compressor on and off.
Or get denso compressor new or used...
@hassantahir2 bhai after engine oil and tuning now my needle is showing normal temp with middle position even at 80 to 90 speed.
I saw person getting his fx carburator cleaned which was attached to engine and mechanic was just spraying carburator spray on it....my top of carb is dirty although mileage is good should i get my cleaned that way?

[RehanBhatti]

Should i use existing sanden by getting all of its seal changed its cooling is good but maybe its clutch is causing to turn compressor on and off.Or get denso compressor new or used...

I will recommend used oem denso compressor with brand new MF condenser and puller fan.

[hassantahir2]

I saw person getting his fx carburator cleaned which was attached to engine and mechanic was just spraying carburator spray on it....my top of carb is dirty although mileage is good should i get my cleaned that way?

Yup bhai that could be done every 10-15k km's. Get either NASA or 7CF Carburetor cleaner spray (in my personal experience 7CF spray work's better) follow the instructions on bottle and spray accordingly.

[pwuser15262980051]

@abid110 @hassantahir2 Everybody in market selling either Radiator jaali, they say they will fix it with old top n bottom n charge 4000 for it. Does Jaali repair means new radiator or you have to buy complete one?

[RehanBhatti]

Better to use old oem radiator top and bottom with new loads jali. OEM radiator top and bottoms r made by thick copper.

[anon71378895]

This post was flagged by the community and is temporarily hidden.

[pwuser15262980051]

Aur mechanic japani radiator jis ko keh rha ha wo kia ha??? Kabuli ?

[hassantahir2]

Aur mechanic japani radiator jis ko keh rha ha wo kia ha??? Kabuli ?

Yup they are Kabli / used and they are made of fiber/plastic tank's and aluminium jaali..
Brand new Loads copper radiator must be available it costs near to 6000/-RS nowadays. @abid110 Bhai Karachi me kahan milay ga Loads ka Radiator?? Loads ka to manufacturing plant bhi shayad Karachi me hi ha.

[pwuser15262980051]

Radiator walas nearby are saying Loads Jaali in 4000 alongwith fitting... but I am not sure its original Loads or not... Loads ka plant quaidabad k pas ha.. last time I checked but their contacy numbers never respond

[hassantahir2]

Bhai those repair guy's will sell you core only ask some spare part's shop they usually have complete radiators.
I don't have good experience with repaired radiators they keep giving problems. With new Radiator it would be peace of mind for atleast 4-5 year's with coolant.

[pwuser15262980051]

3S wlaa says radiator in 8500

[sayedgulhassan]

Apply myself?