Suzuki Cultus Fan Club (2000-2016)

Suzuki

Cultus

cultus

club

Tags: #<Tag:0x00000008bb8408> #<Tag:0x00000008bbbf40>

hassanfarooq694 (Hassan Farooq) 2020-08-14 01:11:27 +0500 #5838

AOA, Can you tell how to connect following obd scanner. it doesn't connect with ecu.

junaidahmad463 (Junaid Malik ) 2020-08-14 01:20:34 +0500 #5839

@hassanfarooq694
Please use SZVIEWER app for Suzuki Cars

First pair the device
Then open szviewer and connect
After few seconds it will display data on app.

xzap042 (xzap042) 2020-08-14 02:06:16 +0500 #5840

I don't agree.

hassanfarooq694 (Hassan Farooq) 2020-08-14 14:59:07 +0500 #5841

Thanks for replying but didn't work for me.

junaidahmad463 (Junaid Malik ) 2020-08-14 15:27:31 +0500 #5842

your obdII isn't paired with your mobile. please remove the obdII, then re insert it in port. And then start your cars engine. It will then show "OBDII" in your bluetooth (near devices).
@hassanfarooq694

engnr.mubashir (engnr.mubashir) 2020-08-14 17:29:41 +0500 #5843

Why is that ?

engnr.mubashir (engnr.mubashir) 2020-08-14 19:04:01 +0500 #5844

Cultus steering box price any luck to get genuine ?

engnr.mubashir (engnr.mubashir) 2020-08-14 22:19:52 +0500 #5845

Torque app is garbage I purchased pro and tried to look for DTC other than ECU found out that it only shows engine DTC not anything else, so immediately refunded the amount. Then installed MotoData OBD and it worked well and showing DTC 9 modules of car. 2017 Toyota Corolla Altis 1.6

engnr.mubashir (engnr.mubashir) 2020-08-18 13:45:06 +0500 #5846

Suddenly car starts to knock since morning, everything was working fine till night. Any Idea what could be wrong also haven't filled fuel till.

RehanBhatti (RehanBhatti) 2020-08-18 15:02:22 +0500 #5847

Check whole ignition system, specially spark plugs.

engnr.mubashir (engnr.mubashir) 2020-08-19 14:39:55 +0500 #5848

Bro don't what was wrong but car starts to working normally now no knocking there.

engnr.mubashir (engnr.mubashir) 2020-08-19 15:18:59 +0500 #5849

I have got Breeze Multiflow condenser Installed. Performance is noticeably improved with original compressor but my compressor got weak due to 6 years of time. Budget was out other wise would have installed second hand Duet compressor also yesterday got to know that compressor has got expensive like for 12500 which it was for 8500. AC guy said it has quite good energy to complete this season but not recommended to complete next season with it because if this got seized then you will have to change both compressor and condenser. Engine load has noticeably decrease with AC on after Multiflow condenser.

RehanBhatti (RehanBhatti) 2020-08-19 15:53:44 +0500 #5850

Great. How much Breeze multiflow condenser costed you? And is it bolt on fit?

RehanBhatti (RehanBhatti) 2020-08-19 15:54:56 +0500 #5851

Did you scan your ecu for error code?

engnr.mubashir (engnr.mubashir) 2020-08-19 20:02:29 +0500 #5852

Yes it was Bolt on fit just brackers were little out but slight bending made the job easy also line were in same direction. Length and height of Multiflow condenser was same but depth less compare OEM It think because is Multiflow flow tubing. Costed me 5800 for condenser, 500 for fitting 2000 for refrigerant and 1200 for Receiver dryer.

engnr.mubashir (engnr.mubashir) 2020-08-19 20:03:21 +0500 #5853

No DTC appeared.

Vaqas1 (Vaqas1) 2020-08-19 20:21:58 +0500 #5854

From where you bought condensor from? I also want to do this but most probably in next season if i kept cultus.

engnr.mubashir (engnr.mubashir) 2020-08-19 21:13:16 +0500 #5855

I live near to safoora I got it done from my known guy but he have bought this condenser from Liberty chowk Car AC market near Tariq road Karachi

margallar (margallar) 2020-08-19 21:53:00 +0500 #5856

@engnr.mubashir

bypass the cng advancer, thats the probable cause of knocking

engnr.mubashir (engnr.mubashir) 2020-08-19 22:18:22 +0500 #5857

CNG advance is already removed and bypassed.