Suzuki khyber G15A swap Islamabad

umairjamil6 (30w50) 2020-01-31 00:17:48 +0500 #21

S**t i thought bolt on was literally bolt on . Thanks for clarifying bro. Also i have found the answer on another post of yours.

Hassan1991 (Electrical Engineer ) 2020-01-31 00:19:49 +0500 #22

there's nothing bolt-on in modification world.

Hassan1991 (Electrical Engineer ) 2020-01-31 00:20:29 +0500 #23

Do race it with a g16 cultus in your group.

umairjamil6 (30w50) 2020-01-31 00:21:41 +0500 #24

thats what i have learnt in pakwheels. Bacho ka khel nahi hai. Bara jigra aur hosla chahiye.

Hassan1991 (Electrical Engineer ) 2020-01-31 00:23:03 +0500 #25

yes indeed.

dani_kk (Dmotorsports) 2020-01-31 03:51:55 +0500 #26

Sure bro

mohsinmahar (mohsinmahar) 2020-01-31 07:13:28 +0500 #27

What is the cost of G15 complete

dani_kk (Dmotorsports) 2020-01-31 08:30:58 +0500 #28

Bro 125k complete. Purana deye bagher. Uncut wiring and jdm. Middle East and Singapore, Australia are for 100-110k complete

mohsinmahar (mohsinmahar) 2020-01-31 14:49:00 +0500 #29

What the difference between JDM and others

dani_kk (Dmotorsports) 2020-01-31 15:24:16 +0500 #30

Jdm ones are less used. Remand kum lia hota hai and are cleaner . Compression bhi inka 170+ hota hai sure shot.. Bakion mein Compression is a risk, and condition buht burri hoti mostly and worn out hotay hain.. That's the difference.

mohsinmahar (mohsinmahar) 2020-01-31 16:35:31 +0500 #31

جزاک اللہ

mohsinmahar (mohsinmahar) 2020-01-31 18:17:03 +0500 #32

Tag mee on ur first strt as well as performance, problem etc what u gwt

dani_kk (Dmotorsports) 2020-01-31 21:22:51 +0500 #33

Forsure I'd

umairjamil6 (30w50) 2020-02-05 11:51:47 +0500 #34

How far has the project come?

dani_kk (Dmotorsports) 2020-02-05 21:45:34 +0500 #35

Yar we are stuck so basically multiple projects hain islea, pehle fj40 ki feed deraha tha.. Iska complete karkay sath sath bhejunga...

The engine has started, we've removed it for mount painting and cross member paint job.. And after this engine will go in for final time... And then cold air intake system will be made and then it would be ready to roll. Inshallah

dani_kk (Dmotorsports) 2020-02-05 21:46:42 +0500 #36

Made headers for a client coming from jehlum

Hassan1991 (Electrical Engineer ) 2020-02-06 03:16:21 +0500 #37

bending

abid110 2020-02-06 10:22:28 +0500 #38

is it a baleno engine? transmission is auto?

dani_kk (Dmotorsports) 2020-02-06 16:54:57 +0500 #39

Manual tranny. And G15A. Suzuki esteem

dani_kk (Dmotorsports) 2020-02-07 00:03:57 +0500 #40

Mounts, cross member, finalised and painted matt black.. Ready to be re installed