Suzuki Kyber/Swift Owners & Fan Club

[Stan]

Yaar Ahmed, awesome ride!

Here are some more pics of my khyber (99, Limited):

[daniyalahmad]

Here are some pics of my Khyber!

Looking good (Y)
Do post some pictures of the upper door panels with the tape on them.

[daniyalahmad]

check the compression of ur engine with a compression testera and if compression is good then it may b because at high speeds its required to provide the engine with max of air and fuel.........so check the fuel pumps and clean the carbeurator with carb cleaner......

+1

Also it could be tuning issue.
Some times the tappats are not properly adjusted hence resulting in poor pickup and other such issues.
A G10 gasoline engine with 90%+ compression rate has the ability to touch 160~170km.

[daniyalahmad]

@all khyber owner
y not a khyber gtg in khi?

@all Rwp/Isl members
How about a Khyber gtg in Islamabad or Rawalpindi?

[daniyalahmad]

koe merey b madad kr dey,,,,,,,,,,,,,

Contact @rozzzzz.
He did some mods in the stock setup of his Khyber.

[ahmedzuhaib]

Thanks buddy, Your ride looks kool as well ... kept it clean dude (Y)

Yaar Ahmed, awesome ride!

[Drug_Mafia]

@khi members guyz common wake up.......

[Shah73]

(I have staretd a thread to get the information about the following material, but am pasting following lines in this thread to get urgent response):

Now a days my Khyber 95 is going under the denting and painting job. Denting is almost done and paint is to be started shortly. Car origional colour is simple white and i want to retain the same.

I want to get the information from the experts regarding the following:

1. White colour might have some different shades, if so which shade would be more bright?
2. Is it possible to give metallic touch to the white colour, if so how? This might be possible by using some add-on.
3. I intend to use the Seiken brand, is it fine?
4. Is there any add on used in the paint to increase the life of paint and its brightness?
5. Is there any benefit of paintng the dashboard. Is it long lasting, if so which paint to be used and the procedure of applying paint to it. (as some painters are not so expert)

[merryrox]

i like khyber.... +1

[mehrozniazi1]

hi guys hope u r good
i want to do only headers in my car not downpiping.......will do it later on........
so i need suggestions about piping and its dia.......n those who had done before this plz post the pic of the setup thanks

i have done it before ...

pipe is in total u have to keep it 1.75

stock just remove the middle exhaust and the cat....

if u go any thing big..this will end for fuel being burned and low acceleration

for headers it will cost u around 6k for iron and around 8k for steal ..can go up n down as well depends where u getting it done from

[mehrozniazi1]

@all Rwp/Isl members
How about a Khyber gtg in Islamabad or Rawalpindi?

after this 17th GTG..lets plan for a MK1 gtg

[mehrozniazi1]

(I have staretd a thread to get the information about the following material, but am pasting following lines in this thread to get urgent response):

Now a days my Khyber 95 is going under the denting and painting job. Denting is almost done and paint is to be started shortly. Car origional colour is simple white and i want to retain the same.

I want to get the information from the experts regarding the following:

1. White colour might have some different shades, if so which shade would be more bright?
2. Is it possible to give metallic touch to the white colour, if so how? This might be possible by using some add-on.
3. I intend to use the Seiken brand, is it fine?
4. Is there any add on used in the paint to increase the life of paint and its brightness?
5. Is there any benefit of paintng the dashboard. Is it long lasting, if so which paint to be used and the procedure of applying paint to it. (as some painters are not so expert)

well u can either have simple white.....or u can have alot of shades but for that u have to pay more

like honda ..toyota and suzuki have cars in white colour ...but all have lil bit difference

giving it a metalic touch

you can go for pearl white which came in accord and parado...no idea bout the price but it is expensive compare to normal 1

a friend has done on civic 95...if u visit in DIY/Project section.....SPANO has done it...ask him with my ref

@dashboard...i have done leather work which costed me 3k...it has been in good shape from last 2 years

still good...and paint also costs the same.....

will prefer paint job...as it can be removed easily...plus finishing at edges r good

[daniyalahmad]

after this 17th GTG..lets plan for a MK1 gtg

Sure!
Im in.
Will co-ordinate with you before arranging it.

[bluespark]

Sure!
Im in.
Will co-ordinate with you before arranging it.

excellent idea:)

highly recommended!

[bluespark]

do PM me guys, Just in case I dont look back at this thread!!

[bluespark]

oh BTW, i bought NGK plug wires from Raja autos pindi sadar, 750/= Rs.

[daniyalahmad]

^ Sure!
Will let you know.
Currently you are in Rawalpindi or in Abbotabad?
BTW How are the plug wires performing?

[alishah6]

hi guys
here some pics of my swift ga 87 model

[zainahsan]

Asa, I also own a khyber as in i will....i'm a student. My father bought it. Now i want to modify and completely restore my car. the denting and body work is done now I'm waiting for the weather to change so i can get it repainted. I'm planning to modify my car performance and visually. Please rozzzz bhai help me with these things:
1. A good workshop to get it painted..... where and what time of the year.
2. I need power windows and retractable mirrors....
3. I'm looking forward to upgrade my car performance wise so can it be done on the same engine to increase some horses or i need to swap it....if swap is the only option then tell me which is the best and most powerful engine for it.
Thank U roozzzzz bhai...please helppp me....reply sooon everyone can suggest.....
i'LL POST THE PICTURES.... regards.... Zain ahsan khan.... aka ZAK...

[bluespark]

^ Sure!
Will let you know.
Currently you are in Rawalpindi or in Abbotabad?
BTW How are the plug wires performing?

bro I live in Abbottabad. But I do travel to RWP/ISB from time to time.

Anyway, wires are looking good. I feel that at least pick is improved. Better starting early morning. So I would say its a good spend.