Suzuki mehran slipping problem

[alpine888]

i have a suzuki mehran 2010 model. it slips to the right side when break are applied hard... gari ki allignment bhi ki laykin allignment phir kharab ho gaye... its a serious issue kyunki gari slip karti hai to right pe chali jati jiss ke wajah se foot path takra sakti hai... is liye problem solve karni zaroori hai... what could be the problems... whats the solution

[ahmed2396]

could be many reasons, bad ends control arms, bad shocks, or may be the chasis of car is damaged by accident so car pulls on one side.

[harib4u]

i have a suzuki mehran 2010 model. it slips to the right side when break are applied hard... gari ki allignment bhi ki laykin allignment phir kharab ho gaye... its a serious issue kyunki gari slip karti hai to right pe chali jati jiss ke wajah se foot path takra sakti hai... is liye problem solve karni zaroori hai... what could be the problems... whats the solution

one break oil pipe is blocked. if not then one of break pad is finished

[alpine888]

actuallly i purshased this car a few months ago... car is non accidented but the other person used the car roughly... gari jumps mein tezi se chalata raha hai pechla owner jin ki wajah se mudguards ki neeche right aur left side pi minor cracks the aur jin ki welding hui thi. welding ke baad mechanic ne aur koi fault nahi batai laykin gari slip kar jaati hard breaking se... is ka solution kya karen

[harib4u]

break oil ka pipe hi block ha, pipe utar k break lagao khari gari ko, oil aye to thek hai, warna pipe change karna ho. or gari ko ground main lay ja k zor se break lagao, ab chech karo , front dono wheels ak jitna skit karty hon, isi tarha back k dono b ak jtna skit karty hon, im 60% sure pipe ka masla hai, 39% break pads, n 1% for other

[ahmed2396]

actuallly i purshased this car a few months ago... car is non accidented but the other person used the car roughly... gari jumps mein tezi se chalata raha hai pechla owner jin ki wajah se mudguards ki neeche right aur left side pi minor cracks the aur jin ki welding hui thi. welding ke baad mechanic ne aur koi fault nahi batai laykin gari slip kar jaati hard breaking se... is ka solution kya karen

Please post the pictures of effected area and let the seniors give a reasoning. @capsat

[abdkhan2]

pads chang krwao sai ho jai ge..

[alpine888]

thank u people... i will try to post pictures also if possible but majority people here think that breaks have some problems... breaks ke illawa cracks jin ki welding hui thi unse koi problem to nahi

[dmszack]

Break pipes are clogged or Master Cylinder needs to be replaced.

[muaazahmed1]

What about CAMBER adjustment i think it effects the cars movement???

[husnainkhan]

Faced the EXACT SAME issue in my mehran, it was due to oil, pad issue and a worn out cylinder had to be changed as.well since it wasnt pulling it's rod to the other end so replaced it with new one, mehran's stuff isnt expensive I'd say change all the brake pads and check the oil issue, If doesnt works then most most probably any of those cylinder is at fault. As said by @harib4u hes right

[aady6500]

AoA, meri mehran break lagany pe agy se jholti ha...kia isssue ho sakta ha. thankyou

[Hassan1991]