Suzuki swift m18a supercharged by Dmotorsports

dani_kk (Dmotorsports) 2019-08-08 02:50:06 +0500 #1

Dear folks, another project comes under my name.
Custom supercharger kit for m18a for Suzuki swift. 6psi boost. & tuned on emanage ultimate.

dani_kk (Dmotorsports) 2019-08-08 02:51:21 +0500 #2

dani_kk (Dmotorsports) 2019-08-08 02:51:42 +0500 #3

dani_kk (Dmotorsports) 2019-08-08 02:52:05 +0500 #4

dani_kk (Dmotorsports) 2019-08-08 02:54:27 +0500 #5

Ohlins eibach coil overs installed too for better suspension and handling.

dani_kk (Dmotorsports) 2019-08-08 02:54:52 +0500 #6

Hassan1991 (Electrical Engineer ) 2019-08-08 02:59:24 +0500 #7

hash4u (hash4u) 2019-08-08 03:28:02 +0500 #8

interesting !

dayrider (dayrider) 2019-08-08 15:13:09 +0500 #9

make him do a launch and film the 0-100 run. SHould be astonishingly quick

dani_kk (Dmotorsports) 2019-08-09 02:06:50 +0500 #10

It is quick. Why Don't you make the video and i will do a launch it would be fun. And yes next time will make the videos after tuning it up again.

usmanqadeer.education (Usman Malik) 2019-08-09 02:33:34 +0500 #11

Good job bro. Would be a beast in pro mode

dani_kk (Dmotorsports) 2019-08-09 02:40:31 +0500 #12

Yeah bro, and feels really stable with eibach ohlin coil overs & good braking with oem swift brake pads. Really a power house.

DrUsmanNawaz (DrUsmanNawaz) 2019-08-09 08:11:05 +0500 #13

nice project

sial_ali (sial_ali) 2019-08-09 20:24:28 +0500 #14

how much power is it churning out ? And what tires r u running ?

dani_kk (Dmotorsports) 2019-08-10 01:32:41 +0500 #15

They're standard tires not some slicks. Not a race car basically. And it is pulling around 165-170

mudassir21 (Mudassir Hussain) 2024-01-09 05:08:30 +0500 #16

Hi @dani_kk,

I hope this message finds you well. I've been following your work on this forum and have been quite impressed. Do you have any updates on this project?

I recently upgraded my Suzuki Swift DX 1.3 manual to an M18A engine and an automatic transmission. However, I've been facing issues with the electric coils, leading to rapid degradation and performance problems. Your insights would be immensely helpful.

Additionally, I noticed in the pictures above that you've installed a turbocharger, computer, and spring coils. I'm very interested in these upgrades and would greatly appreciate your guidance on them.

Your help will be highly valued.

Thanks,
Mudassir

dani_kk (Dmotorsports) 2024-01-10 12:35:17 +0500 #17

I believe you called me once with the coil degradation topic?

pwuser170301282912 (PWUser170301282926) 2024-01-20 15:46:49 +0500 #18

Hey,
I also did the same swap just 3 days ago, its kinda still in process, But can I contact you just to compare some notes?

I'd appreciate it.

pwuser170301282912 (PWUser170301282926) 2024-01-20 15:56:36 +0500 #19

@dani_kk
I can also use your help in an issue I'm facing. I used my existing gearbox of Swift 1.3 DLX and changed the head assembly to M18A, If I accelerate it suddenly after a certain point, the RPM goes suddenly up but the power is not transferred to wheels, it seems. Is this something which will become better after flywheel adjustment with time or its any other issue?
Also what's the cost of coil overs you've mentioned above.

Thank you

dani_kk (Dmotorsports) 2024-01-24 03:15:02 +0500 #20

No the clutch is slipping. Either bad pressure vs flywheel balance or altogether slip or worn out clutch plate.