Swaping QG15DE in B13

[aliam_786]

@star2
these pinouts are not right.... got relay...

[aliam_786]

@star2
i had connected ecu relay and given vss by meter only two pins are ecu are missing 64,65....next to k-line

[star2]

@star2
i had connected ecu relay and given vss by meter only two pins are ecu are missing 64,65....next to k-line

64 and 65 are not listed on the pinouts. So, you should be able to wire it up perfectly by now and it should be performing right. Check for error codes and update.

[aliam_786]

yes its working fine now no error code....
p0600 is also removed as i connected neutral,reverse gear wires and vss also connected

[aliam_786]

@isbcap
my meter with working check light and seat belt light and its electronic type works with vss

[aliam_786]

@star2 , @spectra

this is how my radiator is fitted now,itis too much toward right side...

[aliam_786]

edited...

[star2]

These are not the original brakets for putting radiator, your front patti also needs alignment. The original radiator brakets will cost you 600 here in lahore

Sent from my Lumia 3200 cc Diesel CDI

[aliam_786]

These are not the original brakets for putting radiator, your front patti also needs alignment. The original radiator brakets will cost you 600 here in lahore

Sent from my Lumia 3200 cc Diesel CDI

can u post reference pics of those brackets....
front patti uper wali?

[aliam_786]

how i fitted cng (diy)
made a custom bracket for kit..


ventri




start petrol solenoid installed


pipe installed..


ventri view




here is all the wiring not in engine bay...


cylinder stand is cutomized to get maximum boot space... previously installed in middle

[gurk]

Please help which color wire from ECU connects to which Color wire of MAF sensor connector. Engine is QG15. Picture is attached.
Regards,

[aliam_786]

Please help which color wire from ECU connects to which Color wire of MAF sensor connector. Engine is QG15.
Regards,

dont use this sensor for QG15DE this sensor belongs to QR,MR series and many more cars even Nissan 350z has this..
Made py hitachi and voltages does not meet with the sensor of borsh which is original sensor of QG series..
here is referance pic of original sensor...

[aliam_786]

Please help which color wire from ECU connects to which Color wire of MAF sensor connector. Engine is QG15. Picture is attached.
Regards,

Even if u use variable rasistence to adjust voltages then after 2,3 days it will be dead...

[optra2005]

Hi all, I just got swapped a qg15de engine in my korean car, all is okay but stuck at 1 problem. The engine is drinking petrol and gives black smoke, all mechanics say Mass Airflow Meter is not matching with ECU. I tried a dozen of MAF sensors and ECUs .. But same problem.. The sensor looks like same as yours.. Please help

---

Exactly Same trouble with me, got this motor swapped in my Korean car. Tried many ECUs and MAF (made by HITACHI)combination but failed to resolve prob.

What I learned is that MAF we are is incompatible with these ECUs as described by ALI MURAD in his thread.
But I am unable to find the one made by BOSCH, still looking for.

[pwuser154357869164]

Qg15 pe kon sa scanner lagta hai, jo online available ho??